Site seems to be OK. Load issue should be resolved now.
Scoping a .308 Long Ranger.....
-
Dub
Scoping a .308 Long Ranger.....
Will be buying a .308 Long Ranger in the weeks ahead.
It'll be a hunting rifle for deer & hogs.
It's my first lever action gun, but not my first .308.
I think this will be a really handy rifle on longer walks and on hunts where I use a climbing stand, too. Most of the spots I'd likely be in are heavily wooded....tall timber makes for diminished daylight in some spots. Almost all shots would be well under 200 yards.
I tend to buy larger objective scopes on my bolt guns but something just makes me cringe when I consider going this route yet again. The lines on this gun scream for something different.
I'm interested in what you'e scoped yours with and how it's working out for you.
It'll be a hunting rifle for deer & hogs.
It's my first lever action gun, but not my first .308.
I think this will be a really handy rifle on longer walks and on hunts where I use a climbing stand, too. Most of the spots I'd likely be in are heavily wooded....tall timber makes for diminished daylight in some spots. Almost all shots would be well under 200 yards.
I tend to buy larger objective scopes on my bolt guns but something just makes me cringe when I consider going this route yet again. The lines on this gun scream for something different.
I'm interested in what you'e scoped yours with and how it's working out for you.
Re: Scoping a .308 Long Ranger.....
I think that unless your targets will be more than 100 yards away, the largest scope I would look at would be a 3-9x40. I'd be more inclined, though, to look at 2-7x scopes. Probably Leupold, either VX1 or VX2. A scope like that will look good on a Long Ranger, and works really well for distances out to 100.
-
bandit1250
- Cowboy
- Posts: 1692
- Joined: Sun Mar 20, 2016 10:25 pm

Re: Scoping a .308 Long Ranger.....
I tend to favor the 1-4 and 1-5 Leupold straight tube scopes on my lever guns to not upset the balance to much. I think some one does make a straight tube in 1-6X. I also like the Leupold 2-7 scopes and I have no second thoughts on deer size game or coyotes at 200 yds. I seldom have a shot over a 125 yds. I think they still look good on a lever if you go with one close to the compact size scopes with a 28-32MM objective. YMMV.
-
Henry88
Re: Scoping a .308 Long Ranger.....
Though it's a lever action, I think the LR would look good with any scope, and be quite functional.
Problem is, there are so many great scopes out there it's hard to decide.
Problem is, there are so many great scopes out there it's hard to decide.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20449
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Scoping a .308 Long Ranger.....
as can be seen below, Henry's Long Ranger looks very much like our Browning BLR .... beyond looks, they share some design features which include a locking bolt .... while as has been noted there are several good ones available, I use Nikon scopes .... you've given your anticipated shooting range to being in heavy woods out to 200 yards .... that pretty much echos our use for our Browing .... I like the Nikon's PROSTAFF 5 2.5-10X50 .... the 2.5 setting is great of close work and the 10 magnification does well at longer ranges .... Nikon scopes do well in low light conditions
You do not have the required permissions to view the files attached to this post.
-
Dub
Re: Scoping a .308 Long Ranger.....
JEBar wrote:as can be seen below, Henry's Long Ranger looks very much like our Browning BLR .... beyond looks, they share some design features which include a locking bolt .... while as has been noted there are several good ones available, I use Nikon scopes .... you've given your anticipated shooting range to being in heavy woods out to 200 yards .... that pretty much echos our use for our Browing .... I like the Nikon's PROSTAFF 5 2.5-10X50 .... the 2.5 setting is great of close work and the 10 magnification does well at longer ranges .... Nikon scopes do well in low light conditions
That is one sweet BLR you have there. Looks like one of the classic models.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20449
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Scoping a .308 Long Ranger.....
thank you .... as best I can recall she was made in Belgium in 1969 .... she'll never have wood as pretty as what I've seen on many Henry rifles and she's earned every blemish .... with our handloads using 150 grain Nosler Ballistic Tips I have had 5 shot, interlocking groups at 100 yards .... even if she never fires another round (that's a terrible thoughtDub wrote:That is one sweet BLR you have there. Looks like one of the classic models.
Re: Scoping a .308 Long Ranger.....
I have a Burris Veracity 2-10x42 on my Savage .308, I used Burris Signature rings for a secure mount to a steel picatinny rail.
Henry Hoo1T
-
Steve
Re: Scoping a .308 Long Ranger.....
Is the scope base available in Steel?
Does anybody know the manufacture part number for the scope base?
any gun shop should be able to guide your selection .... if you wish to order on line a call to Henry customer service should give you the info you would need
Does anybody know the manufacture part number for the scope base?
any gun shop should be able to guide your selection .... if you wish to order on line a call to Henry customer service should give you the info you would need
Re: Scoping a .308 Long Ranger.....
Welcome, Dub, to the Henry Forums from the Show-Me-State!
~Пока~
-
Gregorsway
Re: Scoping a .308 Long Ranger.....
I used a Leupold VX-R 4-12x40mm and am really enjoying the accuracy and low light capabilities. Easy on the eyes too https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58E7A177
You do not have the required permissions to view the files attached to this post.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20449
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Scoping a .308 Long Ranger.....
very, very nice indeed
-
Dub
Re: Scoping a .308 Long Ranger.....
I'm now leaning towards the Leupold VX-R 2-7×33 in German #4 with the Firedot.
Thank you !!!!
PT7 wrote:Welcome, Dub, to the Henry Forums from the Show-Me-State!
Thank you !!!!
-
Dub
Re: Scoping a .308 Long Ranger.....
Gregorsway wrote:I used a Leupold VX-R 4-12x40mm and am really enjoying the accuracy and low light capabilities. Easy on the eyes too https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58E7A177
Gorgeous rifle !!!!!!
-
Gregorsway
Re: Scoping a .308 Long Ranger.....
One more for the road! Dub, have a good time putting together your new Ranger! Great choice on rifle and scope. Those hogs and white tail deer will never know what hit'em!
https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58D626B6
https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58D626B6
You do not have the required permissions to view the files attached to this post.
-
Dub
Re: Scoping a .308 Long Ranger.....
Gregorsway wrote:One more for the road! Dub, have a good time putting together your new Ranger! Great choice on rifle and scope. Those hogs and white tail deer will never know what hit'em!
https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58D626B6
That's the ticket there !
Are those Talley LW rings ? Their base, too ?
-
Gregorsway
Re: Scoping a .308 Long Ranger.....
[quote]Are those Talley LW rings ? Their base, too ?[quote/]
Good eye@@! Yes they are!
Good eye@@! Yes they are!
Last edited by Gregorsway on Mon Jan 02, 2017 8:22 am, edited 1 time in total.
-
Dub
Re: Scoping a .308 Long Ranger.....
PT7 wrote:Welcome, Dub, to the Henry Forums from the Show-Me-State!
Thank you very much from NorthEast Georgia.