Site seems to be OK. Load issue should be resolved now.

Scoping a .308 Long Ranger.....

Post Reply
Dub

Scoping a .308 Long Ranger.....

Post by Dub » Thu Dec 29, 2016 7:26 pm

Will be buying a .308 Long Ranger in the weeks ahead.

It'll be a hunting rifle for deer & hogs.
It's my first lever action gun, but not my first .308.

I think this will be a really handy rifle on longer walks and on hunts where I use a climbing stand, too. Most of the spots I'd likely be in are heavily wooded....tall timber makes for diminished daylight in some spots. Almost all shots would be well under 200 yards.

I tend to buy larger objective scopes on my bolt guns but something just makes me cringe when I consider going this route yet again. The lines on this gun scream for something different.

I'm interested in what you'e scoped yours with and how it's working out for you.

ditto1958
Cowboy
Posts: 1672
Joined: Sun Mar 20, 2016 11:46 pm
Location: Northeastern Wisconsin
United States of America

Re: Scoping a .308 Long Ranger.....

Post by ditto1958 » Thu Dec 29, 2016 8:00 pm

I think that unless your targets will be more than 100 yards away, the largest scope I would look at would be a 3-9x40. I'd be more inclined, though, to look at 2-7x scopes. Probably Leupold, either VX1 or VX2. A scope like that will look good on a Long Ranger, and works really well for distances out to 100.

bandit1250
Cowboy
Posts: 1692
Joined: Sun Mar 20, 2016 10:25 pm
United States of America

Re: Scoping a .308 Long Ranger.....

Post by bandit1250 » Thu Dec 29, 2016 8:19 pm

I tend to favor the 1-4 and 1-5 Leupold straight tube scopes on my lever guns to not upset the balance to much. I think some one does make a straight tube in 1-6X. I also like the Leupold 2-7 scopes and I have no second thoughts on deer size game or coyotes at 200 yds. I seldom have a shot over a 125 yds. I think they still look good on a lever if you go with one close to the compact size scopes with a 28-32MM objective. YMMV.

Henry88

Re: Scoping a .308 Long Ranger.....

Post by Henry88 » Fri Dec 30, 2016 8:05 am

Though it's a lever action, I think the LR would look good with any scope, and be quite functional.

Problem is, there are so many great scopes out there it's hard to decide.

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 20449
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Scoping a .308 Long Ranger.....

Post by JEBar » Fri Dec 30, 2016 9:15 am

as can be seen below, Henry's Long Ranger looks very much like our Browning BLR .... beyond looks, they share some design features which include a locking bolt .... while as has been noted there are several good ones available, I use Nikon scopes .... you've given your anticipated shooting range to being in heavy woods out to 200 yards .... that pretty much echos our use for our Browing .... I like the Nikon's PROSTAFF 5 2.5-10X50 .... the 2.5 setting is great of close work and the 10 magnification does well at longer ranges .... Nikon scopes do well in low light conditions
You do not have the required permissions to view the files attached to this post.

Dub

Re: Scoping a .308 Long Ranger.....

Post by Dub » Fri Dec 30, 2016 8:13 pm

JEBar wrote:as can be seen below, Henry's Long Ranger looks very much like our Browning BLR .... beyond looks, they share some design features which include a locking bolt .... while as has been noted there are several good ones available, I use Nikon scopes .... you've given your anticipated shooting range to being in heavy woods out to 200 yards .... that pretty much echos our use for our Browing .... I like the Nikon's PROSTAFF 5 2.5-10X50 .... the 2.5 setting is great of close work and the 10 magnification does well at longer ranges .... Nikon scopes do well in low light conditions

That is one sweet BLR you have there. Looks like one of the classic models.

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 20449
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Scoping a .308 Long Ranger.....

Post by JEBar » Fri Dec 30, 2016 8:37 pm

Dub wrote:That is one sweet BLR you have there. Looks like one of the classic models.
thank you .... as best I can recall she was made in Belgium in 1969 .... she'll never have wood as pretty as what I've seen on many Henry rifles and she's earned every blemish .... with our handloads using 150 grain Nosler Ballistic Tips I have had 5 shot, interlocking groups at 100 yards .... even if she never fires another round (that's a terrible thought :shock: ), she will be on passed down through the family .... over time I've earned great respect for a 308 from seeing her perform

GeoBoy
Cowhand
Posts: 434
Joined: Sun Mar 27, 2016 3:24 pm
United States of America

Re: Scoping a .308 Long Ranger.....

Post by GeoBoy » Sat Dec 31, 2016 9:27 am

I have a Burris Veracity 2-10x42 on my Savage .308, I used Burris Signature rings for a secure mount to a steel picatinny rail.
Henry Hoo1T

Steve

Re: Scoping a .308 Long Ranger.....

Post by Steve » Sat Dec 31, 2016 11:17 am

Is the scope base available in Steel?
Does anybody know the manufacture part number for the scope base?

any gun shop should be able to guide your selection .... if you wish to order on line a call to Henry customer service should give you the info you would need

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: Scoping a .308 Long Ranger.....

Post by PT7 » Sat Dec 31, 2016 11:57 am

Welcome, Dub, to the Henry Forums from the Show-Me-State!

~Пока~

Gregorsway

Re: Scoping a .308 Long Ranger.....

Post by Gregorsway » Sat Dec 31, 2016 8:26 pm

I used a Leupold VX-R 4-12x40mm and am really enjoying the accuracy and low light capabilities. Easy on the eyes too https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58E7A177
You do not have the required permissions to view the files attached to this post.

User avatar
JEBar
Town Marshal / Deputy Admin
Posts: 20449
Joined: Sun Mar 20, 2016 10:58 pm
Location: central NC
United States of America

Re: Scoping a .308 Long Ranger.....

Post by JEBar » Sat Dec 31, 2016 8:36 pm

very, very nice indeed

Dub

Re: Scoping a .308 Long Ranger.....

Post by Dub » Sat Dec 31, 2016 9:23 pm

I'm now leaning towards the Leupold VX-R 2-7×33 in German #4 with the Firedot.




PT7 wrote:Welcome, Dub, to the Henry Forums from the Show-Me-State!

Thank you !!!!

Dub

Re: Scoping a .308 Long Ranger.....

Post by Dub » Sat Dec 31, 2016 9:25 pm

Gregorsway wrote:I used a Leupold VX-R 4-12x40mm and am really enjoying the accuracy and low light capabilities. Easy on the eyes too https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58E7A177


Gorgeous rifle !!!!!!

Gregorsway

Re: Scoping a .308 Long Ranger.....

Post by Gregorsway » Sun Jan 01, 2017 12:34 am

One more for the road! Dub, have a good time putting together your new Ranger! Great choice on rifle and scope. Those hogs and white tail deer will never know what hit'em!




https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58D626B6
You do not have the required permissions to view the files attached to this post.

Dub

Re: Scoping a .308 Long Ranger.....

Post by Dub » Sun Jan 01, 2017 10:03 pm

Gregorsway wrote:One more for the road! Dub, have a good time putting together your new Ranger! Great choice on rifle and scope. Those hogs and white tail deer will never know what hit'em!




https://scontent-dft4-2.xx.fbcdn.net/v/ ... e=58D626B6

That's the ticket there !

Are those Talley LW rings ? Their base, too ?

Gregorsway

Re: Scoping a .308 Long Ranger.....

Post by Gregorsway » Mon Jan 02, 2017 7:37 am

[quote]Are those Talley LW rings ? Their base, too ?[quote/]

Good eye@@! Yes they are!
Last edited by Gregorsway on Mon Jan 02, 2017 8:22 am, edited 1 time in total.

Dub

Re: Scoping a .308 Long Ranger.....

Post by Dub » Mon Jan 02, 2017 10:13 am

PT7 wrote:Welcome, Dub, to the Henry Forums from the Show-Me-State!


Thank you very much from NorthEast Georgia.

Post Reply