Site seems to be OK. Load issue should be resolved now.
Pretty Good Day
-
Mistered
Pretty Good Day
Got out to send a few rounds downrange today. Kinda windy but mostly clear and I managed these groups. The first is with my Winchester 100 year Commemorative and this is three shots at 50 yards benchrested - like 3/8" of an inch!
Next is six with my BBB .357 also benchrested. Not as good but it was getting windy.
I made a slight change which I think improved my groups - I changed to .093 aperture diameter from a .125 on the Williams sights on both rifles and it gave me a sharper view of my front sights.
Last edited by Mistered on Sun Nov 04, 2018 7:22 pm, edited 1 time in total.
Re: Pretty Good Day
Very nice shooting, that's for sure! Peeps on both rifles? Or a scope on the 30-30?
BB Steel .357 | SGC 22LR | LR .308 | CCH 30-30 | BB Brass .45 Colt (Carbine) | Single Shot 20 gauge | Single Shot .223 | Single Shot 357
-
Mistered
Re: Pretty Good Day
That would be sacrilege on this particular rifle!Or a scope on the 30-30?
Williams receiver sights on both.
- North Country Gal
- Firearms Advisor
- Posts: 6823
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin

Re: Pretty Good Day
Very impressive groups, especially with that 30-30. Love it.
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20436
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Pretty Good Day
Impressive .... I'd be happy with either target ... 
-
Mistered
Re: Pretty Good Day
This is literally the tightest group I have ever shot with a 30-30.Very impressive groups, especially with that 30-30.
I attribute it to the ammo, gun, narrower aperture for the sight and maybe not particularly important but I have been figuring a way to increase the LOP on this rifle as the stock was a bit short for me.
Well i have been thinking of ways to 'lengthen' the stock but in the meantime I was scrounging around through my gun junk and found an older Winchester plastic buttplate and it fit perfectly over the top of the steel one the stock so it added about a 1/2" which really helped.
I could still use about another 1/2" so this winter I'll fab a piece of 1/2" brass flat bar into an extension and with the plastic Winchester butt plate will be about right.
Re: Pretty Good Day
Looks like pine cones and forest targets could be in trouble. Cast or jacketed in the 30-30
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
Mistered
Re: Pretty Good Day
The Speer 100 Grain half jacket 'Plinkers' - an absolute great bullet for light 30-30 loads.Cast or jacketed in the 30-30
-
Mistered
Re: Pretty Good Day
And Jackrabbits on the desert this winter!!Looks like pine cones and forest targets could be in trouble.
-
Ojaileveraction
Re: Pretty Good Day
Looks like they are all touching to me, closer to .308 inches center to center.
- North Country Gal
- Firearms Advisor
- Posts: 6823
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin

Re: Pretty Good Day
A slip on or lace on recoil pad might be another option. I use the leather lace on style on my Contender carbines to get a bit more LOP I like. I get these from Buffalo Arms. Do a great job of reducing recoil, too, when shooting one of the big boomers on the carbine.Mistered wrote:This is literally the tightest group I have ever shot with a 30-30.Very impressive groups, especially with that 30-30.
I attribute it to the ammo, gun, narrower aperture for the sight and maybe not particularly important but I have been figuring a way to increase the LOP on this rifle as the stock was a bit short for me.
Well i have been thinking of ways to 'lengthen' the stock but in the meantime I was scrounging around through my gun junk and found an older Winchester plastic buttplate and it fit perfectly over the top of the steel one the stock so it added about a 1/2" which really helped.
I could still use about another 1/2" so this winter I'll fab a piece of 1/2" brass flat bar into an extension and with the plastic Winchester butt plate will be about right.

- RanchRoper
- Forum Ambassador
- Posts: 12959
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Re: Pretty Good Day
Very good shooting. Well done.
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
Mistered
Re: Pretty Good Day
I m seriously considering fitting a brown, hard rubber solid style butt pad on it. The stock is not the original (nor is the steel butt plate) so its not like I will be dealing with any value issues. I wont be altering the stock so if I ever wanted to put the steel butt plate back on for any reason I could.A slip on or lace on recoil pad might be another option.
Maybe something like this.
Last edited by Mistered on Mon Nov 05, 2018 6:54 pm, edited 1 time in total.
- shootinthecinders
- Cowhand
- Posts: 143
- Joined: Sat Oct 21, 2017 7:48 pm

Re: Pretty Good Day
Do you eat jackrabbit? I know some do and most don’t. I’ve never eaten it but should try it sometime. Although that’s dependent on what the jackrabbit has been eating lol.Mistered wrote:And Jackrabbits on the desert this winter!!Looks like pine cones and forest targets could be in trouble.
BTW, great shooting!
-
Mistered
Re: Pretty Good Day
No but like you I know a some who do and they claim its pretty good in a stew - but I'll leave them for the coyotes and vultures!Do you eat jackrabbit?