Limbsaver effectiveness H010

[isme]

Can anyone tell me how effective the Limbsaver slip on butt pad is with the 45-70.
I have a Henry H010 that I have hunted with the last couple of years and love. I handload for it pretty much exclusively.
I had shoulder surgery at the end of March for a torn bicep. I haven't shot it since but, I have been cleared by my Dr. to resume my activities. He told me I would probably have to build back to my previous activities. I just ordered Skinner sights for my rifle and picked up one of the Limbsavers for it. Should I remove the factory pad or just add the Limbsaver over it. Also how much will this actually reduce the recoil. Any actual experience would be greatly appreciated.

I intend to start back with very light loads and work my way back up. My hunting load has been 405grain hollow base hard cast bullets at about 1600fps. I plan on starting back with a small charge of Unique to drop the velocity to around 800fps as a starting point.
Thanks in advance
Isme

[tractortad]

Welcome to the forum, isme - sounds like you have good plan with your H010. We've got limbsavers on a 45-70 H&R Buffalo Classic and a New England Firearms 12 Ga Single-shot shotgun. Both guns are relatively light and can kick hard with typical factory loads. The limbsavers really make a difference in the felt recoil - makes shooting these guns much more enjoyable. I would put the limbsaver right over the factory pad on your H010 and see if the length of pull still works for you...

[isme]

Thanks for the info Tracortad,
I never really had a problem shooting it prior to the surgery and now I'm anxious to get back to shooting before hunting season. I've got until Nov. but I also realize how far I've got to go.

[Ojaileveraction]

I put a slip-on limb saver on my Marlin 45-70. It very effective .
I can shoot all day, 80+ rounds, using 300gr and 405gr at Trapdoor pressures.

[PT7]

~Welcome~.jpg

Greetings from the Show-Me-State, Isme.

Best on a speedy and good recovery from your surgery.
And hope the Limbsaver works effectively to protect your shoulder.
Take care.

PT7

[CT_Shooter]

Welcome to the forum from CT. I look forward to your range reports, too; and it sounds like you'll be taking it slow and easy. Glad you're here.

[isme]

Thanks for the welcome, and I appreciate all of the assistance you've given me.
isme

[Mags]

Hi isme, welcome from the TV, Oregon. If you haven't already done so please consider visiting the 'How Many' topic and add your Henry to the running tally. Good to have you here. http://henryrifleforums.com/viewtopic.php?f=5&t=2019

[The Wiz]

Welcome and good luck on your rehab. Don't be a " macho man ".

[SGC]

Can’t help you with the pad question as I run the factory pad on my old Marlin.45-70. Wanted to say hi, have enjoyed your comments on BCUSA. (PaPa K there).

[isme]

Well I finally got around to trying it and......


Woo-hoo that was a blast!!!

The Limb Saver worked beautifully!!!
I didn't fire a bunch of rounds but considering I'm still recovering from shoulder surgery, I would rather work my way back a little at a time.
IMG_20180703_205405.jpg

Absolutely no pain or bruising. I actually decided to go with my hunting round for the first round. 405 grain hard cast bullet at about 1600 fps.
I had my SIL with me in case I couldn't do it he could check out the sights for me.
The Skinner sights were amazing also.
IMG_20180703_205031.jpg
I know, I only put a few rounds on paper before switching to reactive targets.

I am very impressed with both products!!!!!

[Mags]

Would love to see your pictures. They seem to be missing.

[isme]

Not sure how I got three of the same picture, can't seem to delete the other two....

Can I just count it as three rifles??? Lol



NOTE : multiple copies of the same picture taken care of .... no need to count to 3

Jim

[JEBar]

nicely done .... makes me want to break out our 45-70 ...

[isme]

It may sound crazy but this is my Grail gun.
I guess this is why I got so excited that I was still able to shoot it, and that the accuracy had improved so much with just a sight change.

I had some concerns that I might not be able to shoot it anymore after the work I had done.

Now, It's all Good!!!

[JEBar]

I had some concerns that I might not be able to shoot it anymore after the work I had done.

all too well understood .... a heart issue put me on blood thinning meds for several years .... consequently, felt recoil became a huge concern .... at this link ===>http://henryrifleforums.com/viewtopic.p ... eez#p33403 <=== you can find a post outlining the mods I had made to our 45-70 and a 12 ga shotgun .... I'm no longer on those meds but I remain very happy with the results

[Mags]

That Skinner sight looks like it belongs there. Like it came from the Henry factory that way.

The Limb Saver looks cushy. I think I'm going to need one. After 60 rounds at my last trip (first trip for my Henry) to the range I had a knot and light bruise on my shoulder. Obviously there is no cushioning from the brass butt plate of the H009B.

[isme]

I did notice that the combination of recoil pads, although effective, did lengthen my trigger pull. It was almost a stretch to work the action. I could do it but, it was at the limit of my reach.
If I decide to stay with the Limbsaver ( more than likely) I will probably switch to the permanent one and fit it to the stock. That will reduce the length of pull back to pretty close to original.

[JEBar]

I did notice that the combination of recoil pads, although effective, did lengthen my trigger pull. It was almost a stretch to work the action. I could do it but, it was at the limit of my reach.
If I decide to stay with the Limbsaver ( more than likely) I will probably switch to the permanent one and fit it to the stock. That will reduce the length of pull back to pretty close to original.

exactly the reason I replace the OEM pad