Track Lights

[Sir Henry]

On Wednesday I’m have an electrician come and install track lights to illuminate two walls and provide theatrical lighting over the loveseats.

I’ll have ceiling tracks to illuminate these two walls.

IMG_2740.jpeg (3.15 MiB) Viewed 9946 times

Each wall will have its own track and be on one switch.

IMG_2741.jpeg (2.88 MiB) Viewed 9946 times

Then each loveseat will have a track directly over them and they will both be on one switch.

IMG_2744.jpeg (2.54 MiB) Viewed 9946 times

[Hatchdog]

Those tree art pieces made from old saws are wonderful.

[markiver54]

Your home is beautiful Gene! and I might add, tastefully decorated.

[Sir Henry]

Those tree art pieces made from old saws are wonderful.

They are my favorites too.

Your home is beautiful Gene! and I might add, tastefully decorated.

It’s a modest house but people like to visit. I’m always getting new stuff and people want to know the latest thing I’ve drug home.

[Sir Henry]

The electrician is here. He had to remove some Sheetrock for access. I’ll be doing the drywall after he leaves.

IMG_2759.jpeg (1.41 MiB) Viewed 9893 times

IMG_2758.jpeg (2.92 MiB) Viewed 9893 times

[Mags]

I think your electrician over did it on sheet rock removal. We had similar work done and the electrician used a 6" hole saw bit on the wall and ceiling. Then used a right angle drill and auger bit to poke holes in the wall top plate. Very simple, less obtrusive sheet rock repair as a result.

[Sir Henry]

I think your electrician over did it on sheet rock removal. We had similar work done and the electrician used a 6" hole saw bit on the wall and ceiling. Then used a right angle drill and auger bit to poke holes in the wall top plate. Very simple, less obtrusive sheet rock repair as a result.

That was the first holes to see what was up there Once he knew he drilled smaller round holes. This was the first.

IMG_2777.jpeg (2.73 MiB) Viewed 9875 times

The second

IMG_2776.jpeg (2.71 MiB) Viewed 9875 times

Then the are small. Remember he had to get a drill up through it.

IMG_2775.jpeg (2.59 MiB) Viewed 9875 times

I’m really happy with the result.

IMG_2774.jpeg (2.62 MiB) Viewed 9875 times

When you sit on the loveseats you have theatrical lighting. If you were to film someone sitting like in an interview it would be perfect.

IMG_2773.jpeg (1.98 MiB) Viewed 9875 times

IMG_2772.jpeg (3.01 MiB) Viewed 9875 times

[Hatchdog]

Very nice.

[Mags]

...
I’m really happy with the result.
...

That's the important part. The space is lit up nicely.

[dave77]

What's the line hanging down from the ceiling in the last photo, a cat toy?

[Sir Henry]

What's the line hanging down from the ceiling in the last photo, a cat toy?

Yes.

IMG_2724.jpeg (1.55 MiB) Viewed 9003 times

[GunnyGene]

The electrician is here. He had to remove some Sheetrock for access. I’ll be doing the drywall after he leaves.
IMG_2759.jpeg

IMG_2758.jpeg

Love what you've done with your place! But I have to tell you that I got a touch of vertigo from that top down picture of the wiring.

[Sir Henry]

I worked on patching the ceiling yesterday. The first step is to cut a 1x4” board about a foot long and place it in the hole.

IMG_2826.jpeg (2.04 MiB) Viewed 8936 times

Then put two screws into the sheet rock in the ceiling and then into the plugs that were removed.

IMG_2823.jpeg (1.43 MiB) Viewed 8936 times

I saved the pieces taken out and they will fit back in perfectly.

IMG_2825.jpeg (1.11 MiB) Viewed 8936 times

I have more time in taking the pictures and posting than I do thus far.

IMG_2827.jpeg (1.78 MiB) Viewed 8935 times

I still have one more screw and then of course the mudding.

IMG_2828.jpeg (1.84 MiB) Viewed 8935 times

[Ernie]

It's the mudding that I screw up. Never got a feel for it.

[Sir Henry]

It's the mudding that I screw up. Never got a feel for it.

Most people put on too much and then have a lot of sanding to do. I put just enough on and instead of sanding I wipe it down with a damp cloth.

[markiver54]

It's the mudding that I screw up. Never got a feel for it.

Most people put on too much and then have a lot of sanding to do. I put just enough on and instead of sanding I wipe it down with a damp cloth.

The tough part is matching the texture.

[Sir Henry]

It's the mudding that I screw up. Never got a feel for it.

Most people put on too much and then have a lot of sanding to do. I put just enough on and instead of sanding I wipe it down with a damp cloth.

The tough part is matching the texture.

The ceiling doesn’t have much texture and the walls will be spray textured when it’s painted which I plan to do this summer. What I can’t do is brush or roll the touchup.

[Mags]

Ya, can't brush paint mud even after it's dry. The paint will rewet the mud and the brush will smear it. But it can be roller painted one swipe, starting outside patch area rolling over the patched spot. This one pass seals the mud. Just make sure to not let the roller skid and don't pivot the roller going over the patched spot. After letting the paint dry it can be roller painted again normally.

[Sir Henry]

Ya, can't brush paint mud even after it's dry. The paint will rewet the mud and the brush will smear it. But it can be roller painted one swipe, starting outside patch area rolling over the patched spot. This one pass seals the mud. Just make sure to not let the roller skid and don't pivot the roller going over the patched spot. After letting the paint dry it can be roller painted again normally.

Thanks. I might try that.

[Sir Henry]

I did some filling today. I estimate it will take me three fills to get it right. The picture was taken when it was still wet. The gaps now are much lighter.

IMG_3088.jpeg (1.41 MiB) Viewed 8822 times

When it’s completely dry I’ll take a damp cloth over the excess and then fill the gaps in again.