Site seems to be OK. Load issue should be resolved now.

Still getting high on the job...

Sit back and talk with friends. Same rules as before. Rule #1-Relax with friends on the front or back porch.
Rule #2-No Politics, religion or anything above a G level.
Post Reply
User avatar
Vaquero
Ranch Boss
Posts: 12124
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Still getting high on the job...

Post by Vaquero » Tue Jun 04, 2024 9:00 am

Oh yeah, fooled ya. Different kind of high.🤣😉

FB_IMG_1717459294847.jpg
FB_IMG_1717459294847.jpg (149.34 KiB) Viewed 1040 times
20240603_100759.jpg
20240603_100759.jpg (3.58 MiB) Viewed 1040 times

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Sir Henry
Administrator / Owner
Posts: 14624
Joined: Sun Mar 20, 2016 10:58 pm
Location: Price County Wisconsin
United States of America

Re: Still getting high on the job...

Post by Sir Henry » Tue Jun 04, 2024 10:30 am

Can I borrow one of those ladders?
Hi, my name is Gene and I'm a Henryholic from Wisconsin.

Range Reporter: Henry Repeater

User avatar
fortyshooter
Ranch Foreman
Posts: 7088
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: Still getting high on the job...

Post by fortyshooter » Tue Jun 04, 2024 11:43 am

Looks like you have that well planned out! No helper?

User avatar
Vaquero
Ranch Boss
Posts: 12124
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: Still getting high on the job...

Post by Vaquero » Tue Jun 04, 2024 12:13 pm

fortyshooter wrote:
Tue Jun 04, 2024 11:43 am
Looks like you have that well planned out! No helper?
Thanks, we've been doing it for a long time.
Yes, he was on the ground and the one who took the picture of me. 😉

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Still getting high on the job...

Post by BigAl52 » Tue Jun 04, 2024 1:20 pm

Old men dont belong on ladders.
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

HenryFan
Cattle Driver
Posts: 768
Joined: Sat Nov 18, 2023 9:43 am
Location: South Carolina
United States of America

Re: Still getting high on the job...

Post by HenryFan » Tue Jun 04, 2024 1:35 pm

Almost 30 years ago, I was going up a ladder to go on the roof to blow off leaves.

I woke up in Beaufort Memorial Hospital in Beaufort, SC with broken ribs, a concussion and staples holding my scalp together.

That was when I was in my 40's and I avoid ladders like the plague at 75.

Be careful out there Vaquero and others.

User avatar
dave77
Drover
Posts: 2317
Joined: Mon Sep 25, 2017 12:09 am
Location: Eastern Washington
United States of America

Re: Still getting high on the job...

Post by dave77 » Tue Jun 04, 2024 2:00 pm

Don't be like this guy.

Image

User avatar
Hatchdog
Ranch Foreman
Posts: 7978
Joined: Mon Jan 06, 2020 5:04 pm
Location: Deer Park, WA
United States of America

Re: Still getting high on the job...

Post by Hatchdog » Tue Jun 04, 2024 4:55 pm

I’d have to get the other kind of high to climb up where you are :shock: :o :lol:

User avatar
Vaquero
Ranch Boss
Posts: 12124
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: Still getting high on the job...

Post by Vaquero » Tue Jun 04, 2024 5:40 pm

Hatchdog wrote:
Tue Jun 04, 2024 4:55 pm
I’d have to get the other kind of high to climb up where you are :shock: :o :lol:
Been there and done that too :o many moons ago.
Some 30 years ago that was an every day thing. :roll: ;) 8-)

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
dave77
Drover
Posts: 2317
Joined: Mon Sep 25, 2017 12:09 am
Location: Eastern Washington
United States of America

Re: Still getting high on the job...

Post by dave77 » Tue Jun 04, 2024 9:35 pm

Heights never bothered me, I was always the guy who had to go up on the lift to change the gym light bulbs, used to walk right along the edge of a sloped roof to blow leaves out of the rain gutters. When I was a kid I climbed most of the big trees in the neighborhood and my mom and older brother told me they once caught me going up a ladder to a neighbors roof before I could even walk.

Now I'm very unsteady on my feet when I get winded and while I will still go up a ladder onto a roof I'm a lot more cautious.

User avatar
Vaquero
Ranch Boss
Posts: 12124
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: Still getting high on the job...

Post by Vaquero » Tue Jun 04, 2024 10:36 pm

dave77 wrote:
Tue Jun 04, 2024 9:35 pm
Heights never bothered me, I was always the guy who had to go up on the lift to change the gym light bulbs, used to walk right along the edge of a sloped roof to blow leaves out of the rain gutters. When I was a kid I climbed most of the big trees in the neighborhood and my mom and older brother told me they once caught me going up a ladder to a neighbors roof before I could even walk.

Now I'm very unsteady on my feet when I get winded and while I will still go up a ladder onto a roof I'm a lot more cautious.
As a kid, we had a huge Walnut tree in the backyard, I would climb it as high as the limbs would hold my weight.
Later there was a two lane hwy at the end of the road we lived on, about 100 yds. from that intersection was a bridge over a set of railroad tracks.
Probably over 100 ft. above the tracks, I would walk the concrete banister. Probably 8-10 inches wide. Got some looks from the passer byers. :lol:

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
cooperhawk
Ranch Foreman
Posts: 5624
Joined: Sat Jan 12, 2019 3:27 pm
Location: 20 miles south of the twin cities.
United States of America

Re: Still getting high on the job...

Post by cooperhawk » Wed Jun 05, 2024 9:01 am

I used to climb ladders all the time but now the Wife says to stay on the ground old fart. :lol:
Retired FAA Air Traffic Control Supervisor
VFW (Life Member), VVA (Life Member)
Legion (Life Member), NRA (Life Member)
U S Army Aviation 64-67, Vietnam MACV 65-66

User avatar
Redthies
Cowboy
Posts: 1742
Joined: Wed Aug 01, 2018 6:16 pm
Location: Top of the 395
Canada

Re: Still getting high on the job...

Post by Redthies » Thu Jun 06, 2024 12:59 am

dave77 wrote:
Tue Jun 04, 2024 2:00 pm
Don't be like this guy.

Image
That is AMAZING! I love it!
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF

User avatar
Redthies
Cowboy
Posts: 1742
Joined: Wed Aug 01, 2018 6:16 pm
Location: Top of the 395
Canada

Re: Still getting high on the job...

Post by Redthies » Thu Jun 06, 2024 1:02 am

I used to do heli safety and rigging for film, as well as climbing stunt work. I am not bothered (obviously) by heights.

RP, you doing siding too or just soffit/facia?
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF

User avatar
Vaquero
Ranch Boss
Posts: 12124
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: Still getting high on the job...

Post by Vaquero » Thu Jun 06, 2024 7:33 am

Redthies wrote:
Thu Jun 06, 2024 1:02 am
I used to do heli safety and rigging for film, as well as climbing stunt work. I am not bothered (obviously) by heights.

RP, you doing siding too or just soffit/facia?
On that particular job, we just did the soffit and fascia, another crew is hanging the Hardy board siding.
We do vinyl siding, vertical or horizontal, and the vinyl Shake sidings, no Hardy stuff.

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Redthies
Cowboy
Posts: 1742
Joined: Wed Aug 01, 2018 6:16 pm
Location: Top of the 395
Canada

Re: Still getting high on the job...

Post by Redthies » Thu Jun 06, 2024 11:04 am

That’s good. Hardy is nasty to work with, and HEAVY. It’s nice once it’s on the building though. I prefer the look of it to vinyl, but neither one beats the look of cedar. Practical wise, I would pick Hardy.
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF

User avatar
BrokenolMarine
Ranch Foreman
Posts: 7471
Joined: Sat Nov 26, 2016 8:28 am
Location: South Central Oklahoma in the mountains
United States of America

Re: Still getting high on the job...

Post by BrokenolMarine » Tue Jun 11, 2024 10:30 am

The docs don't allow me on ladders any longer, but I did roofing work when I helped to build additions with my stepfather all thru high school. Later, thru my Marine Corps Career, I worked atop the helos, often when they were hanging over the edge of the flight deck of the carrier, 13 stories above the water. :o

Yeah, not really afraid of the heights. :D We'd also hang out of the helo, wearing the gunner's belt when hoisting or shooting... ;) I miss it all.

Congrats on still being able to do the work.
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.

I don't look back at the things I can no longer do, I just look forward to the things I still can.

Post Reply