Site seems to be OK. Load issue should be resolved now.
What did you do at your reloading bench today?
-
Luv the lever
- Cowhand
- Posts: 201
- Joined: Sat Mar 05, 2022 9:52 pm

Re: What did you do at your reloading bench today?
I don’t know how to post a pic but I now have a reloading bench. It’s been a week and already has additions.
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: What did you do at your reloading bench today?
Ltl, believe me, I've been on this and other forums and I just figured out how to post pics last week. And still not to good at it, but, its coming around.Luv the lever wrote: ↑Sun Oct 02, 2022 6:52 pmI don’t know how to post a pic but I now have a reloading bench. It’s been a week and already has additions.
Got a teenager in the house? Someone like that will show you how to do it in no time. Trust me.
- fortyshooter
- Ranch Foreman
- Posts: 7097
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.

Re: What did you do at your reloading bench today?
That color really pops like I am sure those will when the hammer falls Randy!
I am loading up some 44 Magnum 240 XTP with 2400 now. Have a bit more 44 shooting coming up soon.
I am loading up some 44 Magnum 240 XTP with 2400 now. Have a bit more 44 shooting coming up soon.
Re: What did you do at your reloading bench today?
Cleaned up and tumbled 250 rounds of 357 Mag cases.
Paul
Paul
Re: What did you do at your reloading bench today?
Loading up 45-70 deer loads... 48 grains of 3031. 300 grain Hornady hollow point
-
Luv the lever
- Cowhand
- Posts: 201
- Joined: Sat Mar 05, 2022 9:52 pm

Re: What did you do at your reloading bench today?
30-30, Hornady once fired brass, 150 gn Jacketed-RN Hornady, Winchester WLR and 35gn of BL-C(2).
Re: What did you do at your reloading bench today?
Loaded up 200 rounds of 45 Colt. Just had to put a dent in that pile of clean brass I had.
Paul
Paul
Re: What did you do at your reloading bench today?
Tumbled a bucket of 45 Colt brass.
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
- Vaquero
- Ranch Boss
- Posts: 12158
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: What did you do at your reloading bench today?
Emptied another sleeve of LPP's yesterday...
Sized, primed, and expanded 93 pcs. of 41 mag. brass.
Then loaded some 210 xtp's for a little testing.
RP
Sized, primed, and expanded 93 pcs. of 41 mag. brass.
Then loaded some 210 xtp's for a little testing.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- Vaquero
- Ranch Boss
- Posts: 12158
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: What did you do at your reloading bench today?
Yesterday afternoon I ran a load of 41's through the tumbler.
This morning I was putting them up and sorting some more brass to be cleaned.
Moving this and that around.... I discovered a 2 lb., 2.5 oz. coffee can.
Upon opening I was surprised to find it about a third full of "primed" 45 acp brass.
Then I found a bag of 265 gr 44 cal. fn Hornady bullets.
60 pcs., I use them in the t-4's.
RP
This morning I was putting them up and sorting some more brass to be cleaned.
Moving this and that around.... I discovered a 2 lb., 2.5 oz. coffee can.
Upon opening I was surprised to find it about a third full of "primed" 45 acp brass.
Then I found a bag of 265 gr 44 cal. fn Hornady bullets.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: What did you do at your reloading bench today?
Now that's what I call a good day. I'll bet you put those bullets and brass in a safe place so you wouldn't loose them.Vaquero wrote: ↑Sun Oct 30, 2022 2:49 pmYesterday afternoon I ran a load of 41's through the tumbler.
This morning I was putting them up and sorting some more brass to be cleaned.
Moving this and that around.... I discovered a 2 lb., 2.5 oz. coffee can.
Upon opening I was surprised to find it about a third full of "primed" 45 acp brass.![]()
![]()
Then I found a bag of 265 gr 44 cal. fn Hornady bullets.60 pcs., I use them in the t-4's.
RP
Paul
- Vaquero
- Ranch Boss
- Posts: 12158
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: What did you do at your reloading bench today?
Well, I slide that brass back, and made a mental note.Headhog wrote: ↑Sun Oct 30, 2022 4:06 pmNow that's what I call a good day. I'll bet you put those bullets and brass in a safe place so you wouldn't loose them.Vaquero wrote: ↑Sun Oct 30, 2022 2:49 pmYesterday afternoon I ran a load of 41's through the tumbler.
This morning I was putting them up and sorting some more brass to be cleaned.
Moving this and that around.... I discovered a 2 lb., 2.5 oz. coffee can.
Upon opening I was surprised to find it about a third full of "primed" 45 acp brass.![]()
![]()
Then I found a bag of 265 gr 44 cal. fn Hornady bullets.60 pcs., I use them in the t-4's.
RP![]()
Paul
Don't shoot them much at the moment as I don't have a pistol in that cal. at the moment.
Well except for the convertible BH.
The 265's went with the other 100 that I have, and knew where they were.
I do have a few of those loaded and on stand by.
But you are correct, was a nice find on both, and put a Big
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: What did you do at your reloading bench today?
Randy, this seems to happen to me also. Looking for one thing, stumble across something else that i forgot, but, can certainly use.Vaquero wrote: ↑Sun Oct 30, 2022 2:49 pmYesterday afternoon I ran a load of 41's through the tumbler.
This morning I was putting them up and sorting some more brass to be cleaned.
Moving this and that around.... I discovered a 2 lb., 2.5 oz. coffee can.
Upon opening I was surprised to find it about a third full of "primed" 45 acp brass.![]()
![]()
Then I found a bag of 265 gr 44 cal. fn Hornady bullets.60 pcs., I use them in the t-4's.
RP
Scheese, go figure!
Re: What did you do at your reloading bench today?
Rifletom wrote: ↑Sun Oct 30, 2022 7:51 pmRandy, this seems to happen to me also. Looking for one thing, stumble across something else that i forgot, but, can certainly use.Vaquero wrote: ↑Sun Oct 30, 2022 2:49 pmYesterday afternoon I ran a load of 41's through the tumbler.
This morning I was putting them up and sorting some more brass to be cleaned.
Moving this and that around.... I discovered a 2 lb., 2.5 oz. coffee can.
Upon opening I was surprised to find it about a third full of "primed" 45 acp brass.![]()
![]()
Then I found a bag of 265 gr 44 cal. fn Hornady bullets.60 pcs., I use them in the t-4's.
RP
Scheese, go figure!![]()
I have just the opposite problem, I go looking for something only to recall I already sold or traded it.
Vaquero, I will say that Halloween came a couple of days early for you. “Trick or brass/bullets”…
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: What did you do at your reloading bench today?
Went out to the shop to "organize" my ammo boxes. In other words, ammo only in ammo box, cleaning stuff in another box and tools in another box.
What a colossal waste of time that was! Finally put everything back like I've been doing for 47 years and know where everything is. Man cave stuff I suppose.
What a colossal waste of time that was! Finally put everything back like I've been doing for 47 years and know where everything is. Man cave stuff I suppose.
Re: What did you do at your reloading bench today?
Put together 50 rounds of 308 Win. today. Found 25 cases that were already primed and 80 cleaned cases. So I sized the clean cases then check length. Only 7 needed trimming. After trimming primed up the 80 cases and proceeded to charge and finish the 50 rounds. Now I have 55 primed and ready to load cases, back on the shelf.
Paul
Paul
- Mr. Neutron
- Cowhand
- Posts: 365
- Joined: Mon Sep 26, 2022 7:34 pm
- Location: Near Boring, Oregon

Re: What did you do at your reloading bench today?
I walked down to the basement this morning, where my reloading bench is. Looked at the mess, and ran back upstairs, screaming like a 12 yr. old schoolgirl........
Added in EDIT: Here's what scared me. Obviously, "Organization" is not one of my keener skills......
Added in EDIT: Here's what scared me. Obviously, "Organization" is not one of my keener skills......
Jimmie
An Okie living in Oregon
H009G
H004
H009BG
"Never miss a good chance to shut up." Will Rogers
"It's better to eat yer fruit before ya shoot it." youtuber WHO_TEE_WHO
An Okie living in Oregon
H009G
H004
H009BG
"Never miss a good chance to shut up." Will Rogers
"It's better to eat yer fruit before ya shoot it." youtuber WHO_TEE_WHO
Re: What did you do at your reloading bench today?
Similar here though mine is in the garage. It gets piled with stuff going to and fro between the house and outside.
UPDATES: OR passes 114, "one of strictest gun control measures in U.S." https://henryrifleforums.com/viewtopic. ... 34#p213234
- Mr. Neutron
- Cowhand
- Posts: 365
- Joined: Mon Sep 26, 2022 7:34 pm
- Location: Near Boring, Oregon

Re: What did you do at your reloading bench today?
Yeah, I definitely see how that happens, Mags.
The Hunting Seasons, and all the prep time beforehand, are hard on mah po ole reload bench.
I run down there, find what I need and/or pile other and more stuff on the bench, then run off leavin' the mess.
It'll get cleaned up here shortly, after Elk season..... I hope......
The Hunting Seasons, and all the prep time beforehand, are hard on mah po ole reload bench.
It'll get cleaned up here shortly, after Elk season..... I hope......
Last edited by Mr. Neutron on Tue Nov 01, 2022 6:40 pm, edited 1 time in total.
Jimmie
An Okie living in Oregon
H009G
H004
H009BG
"Never miss a good chance to shut up." Will Rogers
"It's better to eat yer fruit before ya shoot it." youtuber WHO_TEE_WHO
An Okie living in Oregon
H009G
H004
H009BG
"Never miss a good chance to shut up." Will Rogers
"It's better to eat yer fruit before ya shoot it." youtuber WHO_TEE_WHO
- Rifletom
- Deputy Marshal
- Posts: 4014
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory

Re: What did you do at your reloading bench today?
A little TLC and you're back in business. What's the scope on the bench?Mr. Neutron wrote: ↑Tue Nov 01, 2022 9:58 amI walked down to the basement this morning, where my reloading bench is. Looked at the mess, and ran back upstairs, screaming like a 12 yr. old schoolgirl........
Added in EDIT: Here's what scared me. Obviously, "Organization" is not one of my keener skills......
20221101_095428.jpg