Site seems to be OK. Load issue should be resolved now.

9/28/16 Henry H006M & SmokeWagon

Put your range reports for all brands and types of firearms and other items.
Post Reply
User avatar
CT_Shooter
Administrator emeritus
Posts: 5770
Joined: Mon Mar 21, 2016 8:42 am
Location: Connecticut
United States of America

9/28/16 Henry H006M & SmokeWagon

Post by CT_Shooter » Thu Sep 29, 2016 11:11 am

I got to the range yesterday with some new handloads.

The Ammo
I increased the powder for each of the two bullets I used, though I'm still in the mid-range of the recommended charges. I think both guns liked the 130 grain FMJs better than the 125 grain JSPs.

The Henry H006M
These targets show that I still needed to move the front sight on my Henry a bit more to get it centered, which I did after I got home and cleaned the gun. Maybe next time, the POIs will be scattered in the center of the target and not so far to the right. I'd only given it two taps to the right since I put on the Skinner Express Peep site, so we'll see if the third tap takes it home. I also haven't used a bench to sight it in or to make adjustments, so it's a little at time from a standing off hand position.

The Uberti SmokeWagon
I put a small amount of masking tape on the front sight of the SmokeWagon which helped a lot, and I think I discovered the sight picture it likes. My target for the 130 grain FMJs was much better than the target of 125 grain JSPs, and even though the JSP target is numbered "2", it was actually the first target that I put up, so I improved with the revolver by the end of the session. Certainly, I will be giving myself much more practice. ;)

As usual, I shoot indoors, standing and off hand at six inch targets. I shoot five rounds from each gun, alternating between the two until the box of 50 rounds is gone.

I was the only shooter at the range for most of my session, which was nice.
Henry Brass Big Boy .357 75' 130 grain FMJ
Henry Brass Big Boy .357 75' 130 grain FMJ
SmokeWagon .357 25' 130 grain FMJ
SmokeWagon .357 25' 130 grain FMJ
Henry Brass Big Boy .357 75' 125 grain JSP
Henry Brass Big Boy .357 75' 125 grain JSP
SmokeWagon .357 25' 125 grain JSP
SmokeWagon .357 25' 125 grain JSP
H006M BBB .357 - H001 Classic .22LR - Uberti/Taylors & Co. SmokeWagon .357 5.5" - Uberti/Taylors & Co. RanchHand .22LR 5.5" - Colt King Cobra Carry 2" - Colt Official Police 38spl 4"

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: 9/28/16 Henry H006M & SmokeWagon

Post by PT7 » Thu Sep 29, 2016 11:32 am

Lots of white splashes once again, CT! Very good target results. :)

Hope that "3rd tap brings it home" on your BBB sight in. I really struggle with bench rest shooting, but I know it's a better way to sight in than off hand standing. I've done that with my Henry rifle, too. Just takes a little longer to get there.

Your masking tape testing on the SmokeWagon sounded good. I have a suggestion, which works quite well for me, and I know a number of folk do this. First, the pinned black sight I have on my SP101 has no slope to it, and is perfectly perpendicular. That leaves a nice rectangle to focus on. I painted that rectangle with a pale green nail polish, which my eyes easily grab. Almost lights up like a beacon, and I'm completely pleased with my shooting after doing this. That's all I did to improve my front sight. It should work okay even if you have a ramped sight on your SmokeWagon. For laughs, the company named the nail polish color "Wild Thing." :lol:

Have a great day, and take good care.

~Пока~

DWD445

Re: 9/28/16 Henry H006M & SmokeWagon

Post by DWD445 » Thu Sep 29, 2016 12:27 pm

Looks like you're getting better w/the revolver, Good shootin' !! ;)

User avatar
CT_Shooter
Administrator emeritus
Posts: 5770
Joined: Mon Mar 21, 2016 8:42 am
Location: Connecticut
United States of America

Re: 9/28/16 Henry H006M & SmokeWagon

Post by CT_Shooter » Thu Sep 29, 2016 3:12 pm

PT7 wrote: I have a suggestion... I painted [the front sight] with a pale green nail polish (Wild Thing).
Now that I've actually seen the front sight clearly for the first time using masking tape, I will do as you have. I'm certain it will be much better. Thanks for the suggestion.
H006M BBB .357 - H001 Classic .22LR - Uberti/Taylors & Co. SmokeWagon .357 5.5" - Uberti/Taylors & Co. RanchHand .22LR 5.5" - Colt King Cobra Carry 2" - Colt Official Police 38spl 4"

User avatar
PT7
Drover
Posts: 4889
Joined: Mon Mar 21, 2016 8:32 am
Location: The Show-Me State
United States of America

Re: 9/28/16 Henry H006M & SmokeWagon

Post by PT7 » Thu Sep 29, 2016 7:26 pm

Not a prob. Forgot to mention that I ended up with the pale green polish on the sight after trying a fairly bright orange and also a white (similar to the paint choices Skinner offers on his website). Just depends on how well your eye grabs the different colors.
CT_Shooter wrote:
PT7 wrote: I have a suggestion... I painted [the front sight] with a pale green nail polish (Wild Thing).
Now that I've actually seen the front sight clearly for the first time using masking tape, I will do as you have. I'm certain it will be much better. Thanks for the suggestion.

~Пока~

User avatar
RanchRoper
Forum Ambassador
Posts: 12958
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: 9/28/16 Henry H006M & SmokeWagon

Post by RanchRoper » Thu Sep 29, 2016 8:40 pm

Sure looks good. Nice shooting. Thanks for the report.

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

Post Reply