240 gr. MB Smasher and the BBB

[Vaquero]

After forty's report the other day I decided to try those loads in my 20" BBB and see what they looked like.
I added another load also. 9.0 & 9.5 grs. of Unique. Then the 18.5 grs. 2400, at the same distance of 40 yds. I didn't have any key holes, and just so you know I'm still learning the "cheap peep".
I started at the bottom and worked up.
On the top target with the 2400 the lower right hole was the very last round, may have been operator error or a warm barrel.
Either way that's it from the back yard on a Friday afternoon.

20210806_133116.jpg (277.42 KiB) Viewed 1028 times

RP

[BigAl52]

Well looks like the 9gr load would be a good one. I bet they would be in a nice group if you had a scope on the 44.

[Rifletom]

Good, no tumblers. Kinda like that 9.0gr Unique load. Hope forty gets that issue sorted out.

[Vaquero]

Well looks like the 9gr load would be a good one. I bet they would be in a nice group if you had a scope on the 44.

Good possibility Al, and the 2400 might be interesting also.
But mine is one of the earlier models, and isn't D&T'd.

RP

[BigAl52]

Are those 2 inch dots

[fortyshooter]

Randy if you get a chance try slugging the barrel and see what you have. Looks like yours is shooting well.

[Vaquero]

Are those 2 inch dots

Yes sir.

RP

[Vaquero]

Randy if you get a chance try slugging the barrel and see what you have. Looks like yours is shooting well.

I'll see about it this weekend buddy, and get back to ya.

RP

[BigAl52]

I use 3 inch and it works better for me at the longer distances. 2 inch is hard to see at 50 with irons.

[Vaquero]

Al, with the redneck peep the 2" weren't bad, but I do agree the 3" are better even at just 50 yds. with regular Irons.

RP