Sitting on the steps

Post by **Vaquero** » Thu Jul 22, 2021 10:53 pm

The Marlin Cowboy 38-55, resting on one knee, I lowered the peep just to see where it was.

bad low.

: 20210722_180418.jpg (135.44 KiB) Viewed 1522 times

After a few adjustments I managed this small group, as they say third times a charm. Last shots touches the red. I am liking this sight.

RP

Post by **RanchRoper** » Fri Jul 23, 2021 8:58 am

Looks like you are getting dialed in.

Post by **markiver54** » Fri Jul 23, 2021 12:21 pm

Lookn' good!

Post by **Cofisher** » Fri Jul 23, 2021 1:36 pm

Pretty effective highlighting the low ones.

Post by **BigAl52** » Fri Jul 23, 2021 3:14 pm

Thinkin about ringin steel with my Marlin tomorrow. Seeing this 38-55 action makes me wanna ring that Buffalo

Post by **Vaquero** » Fri Jul 23, 2021 3:23 pm

About to RR.
Thanks Mark.
Lol, CF, I did take another pic but that one severed the purpose.

Go for it Al, what distance?
Waiting on the new gong, then I will attempt some longer distance.

RP

Post by **BigAl52** » Fri Jul 23, 2021 3:56 pm

I usually shoot at about 50 yards with irons but I have shot 100 150 and 200 once upon a time when I used it in cowboy silly wet. Might take a crack or two at it at 75 80 yards tomorrow. Out there on the grasslands you can really stretch it out if you want to.

Post by **Vaquero** » Fri Jul 23, 2021 5:22 pm

Al, how does the Cowboy compare to the Henry?
Do they like similar loads or are they completely different?

RP

Post by **Headhog** » Fri Jul 23, 2021 5:23 pm

Yep, it looks like you're getting ready to put some meat on the table.

Paul

Post by **Shakey Jake** » Fri Jul 23, 2021 8:19 pm

Smookin' hot!

Post by **BigAl52** » Mon Jul 26, 2021 7:35 pm

Vaquero wrote: ↑
Fri Jul 23, 2021 5:22 pm
Al, how does the Cowboy compare to the Henry?
Do they like similar loads or are they completely different?

RP

Just saw this this afternoon Randy after wheeling a paint roller and brush most of the day. The Henry bore is smaller. Just checked my hunting bullets for the Henry are .377. Lyman gas checks from Montana Bullets. Used reloader 7 in that gun also shot a real nice group at 50 yards with in. I havent shot the Henry to much. Its also a little lighter gun than the Marlin as the Henry has a round barrel.

Post by **Vaquero** » Tue Jul 27, 2021 7:22 am

Thanks for gettin back, well then guess you have to have to different bullets.
My Cowboy has a .380 bore. You shooting the short brass in it also?

RP

Post by **BigAl52** » Tue Jul 27, 2021 9:36 am

Vaquero wrote: ↑
Tue Jul 27, 2021 7:22 am
Thanks for gettin back, well then guess you have to have to different bullets.
My Cowboy has a .380 bore. You shooting the short brass in it also?

RP

Yes I only have the short brass. Winchester and Starline. Bought the Starline because I had a couple Winchester 38-55's that I sold. With those I needed the Starline because the brass is thinner and will chamber a bullet at .380 which is what the bore size was on the Winchesters also

Henry Rifle Forums

Sitting on the steps

Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps

Re: Sitting on the steps