Site seems to be OK. Load issue should be resolved now.

What did you do at your reloading bench today?

All things reloading here
Post Reply
User avatar
fortyshooter
Ranch Foreman
Posts: 7097
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: What did you do at your reloading bench today?

Post by fortyshooter » Sat Jul 17, 2021 2:45 pm

Vaquero wrote:
Sat Jul 17, 2021 1:11 pm
Forty I do. Not sure how many, pretty sure I about where they are hiding. I'll get back with you.

RP
Thanks Randy!

User avatar
fortyshooter
Ranch Foreman
Posts: 7097
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: What did you do at your reloading bench today?

Post by fortyshooter » Sat Jul 17, 2021 3:03 pm

Vaquero wrote:
Sat Jul 17, 2021 1:18 pm
Hey Al, putting these to a test later.
Got a good friend just south of St. Louis picked up a Henry CCH in 45 colt and said these preformed well in it.
Checked data, between 19.7 and 20.2, with a very max. of 20.8 with extreme caution.
Going to see if the Cowboy or Rossi like either.

20210717_120444.jpg

RP
That's a good load for the 250 XTP bullet and I load them to 20 gr. for use in my Ruger Bisley Blackhawk, Alaskan and the 45 Colt Henry. They pack a good punch and give 1100 FPS out of my 2.5 inch Alaskan.

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: What did you do at your reloading bench today?

Post by BigAl52 » Sat Jul 17, 2021 5:48 pm

Vaquero wrote:
Sat Jul 17, 2021 1:18 pm
Hey Al, putting these to a test later.
Got a good friend just south of St. Louis picked up a Henry CCH in 45 colt and said these preformed well in it.
Checked data, between 19.7 and 20.2, with a very max. of 20.8 with extreme caution.
Going to see if the Cowboy or Rossi like either.

20210717_120444.jpg

RP
Nice of the USPS to get those to you off the dock at Memphis. Its to bad the people at your local PO couldnt of got a hold of someone up there when she mentioned that to you. Glad you are getting to use them. Good looking round
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
Vaquero
Ranch Boss
Posts: 12159
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: What did you do at your reloading bench today?

Post by Vaquero » Sat Jul 17, 2021 8:45 pm

Hey, at least they did finally make it here.
A lot longer wait than either of us wanted but it worked out.
Appreciate all that you did, and hey I posted a review in the range section. ;)

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Rifletom
Deputy Marshal
Posts: 4014
Joined: Tue Aug 21, 2018 11:26 pm
Location: California Territory
United States of America

Re: What did you do at your reloading bench today?

Post by Rifletom » Mon Jul 19, 2021 9:43 am

Forty, I only found thirty of the small primered .45 auto brass, already loaded. I thought I had more. If I do find any, I'll let you know.

User avatar
Shakey Jake
Drover
Posts: 4351
Joined: Wed Aug 16, 2017 11:10 am
Location: Sugar Land, TX
Contact:
United States of America

Re: What did you do at your reloading bench today?

Post by Shakey Jake » Mon Jul 19, 2021 9:47 am

I loaded up some .357 mag with 158 gr Nosler using 2400 yesterday.
Jake

User avatar
RanchRoper
Forum Ambassador
Posts: 12964
Joined: Mon Mar 21, 2016 12:14 am
Location: Land of Shining Mountains, Alberta
Canada

Re: What did you do at your reloading bench today?

Post by RanchRoper » Mon Jul 19, 2021 11:26 am

Once the cool weather hits I will reload more 45 Colt 200 gr. I had to shoot a bunch to make room in the cabinets!

Kibler Colonial Flintlock .50

Ohkínohkomit - Shoot skillfully

User avatar
Vaquero
Ranch Boss
Posts: 12159
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: What did you do at your reloading bench today?

Post by Vaquero » Mon Jul 19, 2021 1:13 pm

RanchRoper wrote:
Mon Jul 19, 2021 11:26 am
Once the cool weather hits I will reload more 45 Colt 200 gr. I had to shoot a bunch to make room in the cabinets!
I loaded 50 of those this morn RR, trying out a different powder.
5.6 grs. of titegroup, with a 200 gr. cast.

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

Pitchman1968
Cowhand
Posts: 157
Joined: Mon Jun 26, 2017 11:34 am
Location: Central Massachusetts
United States of America

Re: What did you do at your reloading bench today?

Post by Pitchman1968 » Tue Jul 20, 2021 9:22 am

Reloaded 24 rounds of .30-06 for the M1 that my 18 year old grandson fired off when he was here visiting us from Seattle a couple of weeks ago. He began shooting the MI was he was only 10, and that was from a shooting sled. These days he shoots it off hand. Doing this, at 75 yards he fired all 24 rounds (3 enbloc clips), into a 6" group. He did this in 2 minutes & 15 seconds to include inserting 2 new clips and he did not get an "M1 Thumb".

I also reloaded 50 rounds of .30-40 Krag for my Krag carbine, 220 gr. Hornady RN bullets atop 33 grs. of R/L 15. Hopefully, the MV will be around 1950 FPS. I am striving to shoot 3" groups at 100 yards. If the rifle will not do that with the 220 gr. bullets, I will drop down to 180 grains spitzers. Need to be careful when reloading these old Krags to keep the pressure below 40,000 PSI.

Addionally, I cleaned the M1, .30-40 Krag, and my Henry. 44 Mag BBB.

User avatar
Vaquero
Ranch Boss
Posts: 12159
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: What did you do at your reloading bench today?

Post by Vaquero » Tue Jul 20, 2021 9:55 am

Cool on the grandson and the M1.

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

gemihur
Tenderfoot
Posts: 2
Joined: Wed Sep 04, 2019 2:31 pm
United States of America

Re: What did you do at your reloading bench today?

Post by gemihur » Fri Jul 23, 2021 1:34 pm

The Black subs are good.
Each serves a niche.
Pyrodex leaves a protective oily residue upon ignition.
... not great for flintlocks.
777 gives about 12% more pressure with same volume so load accordingly.
It also prefers 209 primers but shotshell reloading should be fine.
Personally 777 is my go-to unless a #11 primer is needed
Image

User avatar
NHshtr
Cowhand
Posts: 191
Joined: Mon Dec 14, 2020 7:50 am
Location: Southern NH
United States of America

Re: What did you do at your reloading bench today?

Post by NHshtr » Fri Jul 23, 2021 4:08 pm

Nice buck! Nice rifle!
I like 777 as well. Once you have your load, it's very consistent and will keep tight groups.

User avatar
runnin n gunnin
Cattle Driver
Posts: 797
Joined: Fri Nov 08, 2019 9:48 pm
Location: Arizona
United States of America

Re: What did you do at your reloading bench today?

Post by runnin n gunnin » Fri Jul 23, 2021 4:13 pm

Just received my Pyrodex RS to load my brass 12 gauge shells for my Hammer Coach Gun. Never gone this route before, looking forward to seeing how it performs.
I stand for the flag, and kneel for my fallen brothers.

User avatar
Rifletom
Deputy Marshal
Posts: 4014
Joined: Tue Aug 21, 2018 11:26 pm
Location: California Territory
United States of America

Re: What did you do at your reloading bench today?

Post by Rifletom » Fri Jul 23, 2021 6:47 pm

I received my T & B order of bullets today; 250gr coated rnfp. Got 'em in four days and no shipping charge! Gotta like that.

User avatar
Vaquero
Ranch Boss
Posts: 12159
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: What did you do at your reloading bench today?

Post by Vaquero » Fri Jul 23, 2021 7:03 pm

Rifletom wrote:
Fri Jul 23, 2021 6:47 pm
I received my T & B order of bullets today; 250gr coated rnfp. Got 'em in four days and no shipping charge! Gotta like that.
45 colt bullets?
Tracking says my new gong should be here tomorrow, and I ordered it late Tues. afternoon.
Also Free Shipping. :D

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Rifletom
Deputy Marshal
Posts: 4014
Joined: Tue Aug 21, 2018 11:26 pm
Location: California Territory
United States of America

Re: What did you do at your reloading bench today?

Post by Rifletom » Fri Jul 23, 2021 7:08 pm

Yeah Randy, for the Colt. Looks like shipping is starting to catch back up. A good thing. Bullets and coating[Hi-tek] look like the Missouri ones.
Happy with that.

User avatar
Shakey Jake
Drover
Posts: 4351
Joined: Wed Aug 16, 2017 11:10 am
Location: Sugar Land, TX
Contact:
United States of America

Re: What did you do at your reloading bench today?

Post by Shakey Jake » Fri Jul 23, 2021 8:08 pm

Not a darn thing! Maybe another day. I've got plenty loaded right now and can't load some calibers because of the primer shortage.
Jake

User avatar
NHshtr
Cowhand
Posts: 191
Joined: Mon Dec 14, 2020 7:50 am
Location: Southern NH
United States of America

Re: What did you do at your reloading bench today?

Post by NHshtr » Fri Jul 23, 2021 8:44 pm

Made up 18 rounds of 7mm-08 Rem. Six rounds each with 3 different charges. Trying to develop a new load with IMR 4350 since I've run out of H4895 which is my go-to powder for that caliber. It's one of the Hodgdon powders made in Australia and things aren't going well there.
Using 120 grain Sierra ProHunters. My usual load shoots real purty from my Savage 110 and I'm hoping I can replicate it with the IMR 4350.

Doing the same for the .243 Win. (Long Ranger). Going to IMR 4831 from RL15. with an 85 grain Sierra GK.
Unless some of the powders I usually use find their way to shelves, I'll be working up new loads before hunting season.
Hope you guys are finding the powder you need.

User avatar
Vaquero
Ranch Boss
Posts: 12159
Joined: Mon Mar 21, 2016 12:56 am
Location: Somewhere between Memphis & Nashville
United States of America

Re: What did you do at your reloading bench today?

Post by Vaquero » Fri Jul 23, 2021 8:52 pm

NH, wish we were closer I'd swap ya a lb of 4895 for that 4350.
That's what I use in my buddies 270, and I'm all but out.

RP
Monte Walsh "You have No idea how little I care". :lol:

Ain't No Apologies for My Temperament :shock:
Si vis pacem, para bellum
H001, H006, H012

User avatar
Ernie
Drover
Posts: 2560
Joined: Thu Mar 07, 2019 8:07 pm
Location: Southwestern Lower Michigan
United States of America

Re: What did you do at your reloading bench today?

Post by Ernie » Sat Jul 24, 2021 7:21 am

Guy at work told me he scored 2000 CCI small pistol primers for $130 at Bass Pro 30 miles away Thursday. Was going to head over but pretty sure they are gone.

Post Reply