Site seems to be experiencing intermittent load issues. If site doesn't present the login screen, try clicking on 'login'

Had a bunch of 357 mag ammo, and no gun

Discussion about what manufactured ammunition feeds your Henry or other firearms
Post Reply
User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Sun Dec 13, 2020 10:08 pm

Recently I traded my last 357 mag revolver and had 456 rounds of 357 & 796 rounds of 38 reloaded ammo left. Being that reloaded ammo is pretty much worthless I did what only seemed right.....I bought a Henry 357. It should arrive later this week, and I am looking forward to it.

User avatar
Cofisher
Drover
Posts: 2572
Joined: Sat Mar 26, 2016 8:02 pm
Location: Colorado/Nebraska
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by Cofisher » Sun Dec 13, 2020 10:33 pm

Smart move. Send a pick when you get it.
Remember, it's not how many guns you have. It's how many bullets you have.

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Sun Dec 13, 2020 11:37 pm

Cofisher wrote:
Sun Dec 13, 2020 10:33 pm
Smart move. Send a pick when you get it.
Will do.
The reloads that I have are all 158gr LSWC. From what I'm reading here so far, it seems most members like FMJ, anything I'll need to watch out for shooting them in the Henry?

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by BigAl52 » Mon Dec 14, 2020 12:49 am

Just make sure they will cycle before you load a bunch up. Some of the Henrys are oal sensitive
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Mon Dec 14, 2020 1:00 am

BigAl52 wrote:
Mon Dec 14, 2020 12:49 am
Just make sure they will cycle before you load a bunch up. Some of the Henrys are oal sensitive
I am going to need luck on my side then as they are all loaded and my son has the re-loading equipment on the other side of the country.

User avatar
fortyshooter
Ranch Foreman
Posts: 7086
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by fortyshooter » Mon Dec 14, 2020 8:38 am

If they feed and bullet is of a hard cast type they should shoot well. All I shoot in now in 38/357 is cast lead bullets.

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Mon Dec 14, 2020 8:52 am

fortyshooter wrote:
Mon Dec 14, 2020 8:38 am
If they feed and bullet is of a hard cast type they should shoot well. All I shoot in now in 38/357 is cast lead bullets.
I'm glad to hear that, these are 1.57". What OAL do you use?

User avatar
BigAl52
Forum Ambassador
Posts: 15048
Joined: Sun Oct 23, 2016 12:43 pm
Location: Evans,Colorado
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by BigAl52 » Mon Dec 14, 2020 10:45 am

1.590 is sammi spec. Those should cycle just fine provided the swc design will run through youre particular gun. If nothing else you can shoot them one at a time.
Don't let the old man in


H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55

User avatar
fortyshooter
Ranch Foreman
Posts: 7086
Joined: Sat Dec 09, 2017 10:37 am
Location: Va.
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by fortyshooter » Mon Dec 14, 2020 11:47 am

beaverislander wrote:
Mon Dec 14, 2020 8:52 am
fortyshooter wrote:
Mon Dec 14, 2020 8:38 am
If they feed and bullet is of a hard cast type they should shoot well. All I shoot in now in 38/357 is cast lead bullets.
I'm glad to hear that, these are 1.57". What OAL do you use?
My 180 gr. cast Magnum load measures 1.585 and feed fine with the flat nose. Those little cherry bombs pack a punch!
Attachments
357  180 gr. target destroyers.jpg
357 180 gr. target destroyers.jpg (190.85 KiB) Viewed 2140 times

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Mon Dec 14, 2020 11:49 am

BigAl52 wrote:
Mon Dec 14, 2020 10:45 am
1.590 is sammi spec. Those should cycle just fine provided the swc design will run through youre particular gun. If nothing else you can shoot them one at a time.
Thanks, and here's hoping.

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Mon Dec 14, 2020 12:01 pm

fortyshooter wrote:
Mon Dec 14, 2020 11:47 am
beaverislander wrote:
Mon Dec 14, 2020 8:52 am
fortyshooter wrote:
Mon Dec 14, 2020 8:38 am
If they feed and bullet is of a hard cast type they should shoot well. All I shoot in now in 38/357 is cast lead bullets.
I'm glad to hear that, these are 1.57". What OAL do you use?
My 180 gr. cast Magnum load measures 1.585 and feed fine with the flat nose. Those little cherry bombs pack a punch!
It has been 6-7 years ago that I loaded these. My son has all the data, equipment and supplies. The label says seated - 1.57"

Powder-A-2400 13.2 gr.
Bullets are - 158gr LSWC
CCI 500 primers
seated 1.57

These shot well in a S&W 627PC so I loaded all the brass I had before sending everything else to him.

User avatar
Rifletom
Deputy Marshal
Posts: 4010
Joined: Tue Aug 21, 2018 11:26 pm
Location: California Territory
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by Rifletom » Mon Dec 14, 2020 6:32 pm

beaverislander wrote:
Mon Dec 14, 2020 12:01 pm
fortyshooter wrote:
Mon Dec 14, 2020 11:47 am
beaverislander wrote:
Mon Dec 14, 2020 8:52 am


I'm glad to hear that, these are 1.57". What OAL do you use?
My 180 gr. cast Magnum load measures 1.585 and feed fine with the flat nose. Those little cherry bombs pack a punch!
It has been 6-7 years ago that I loaded these. My son has all the data, equipment and supplies. The label says seated - 1.57"

Powder-A-2400 13.2 gr.
Bullets are - 158gr LSWC
CCI 500 primers
seated 1.57

These shot well in a S&W 627PC so I loaded all the brass I had before sending everything else to him.
You should be fine with that load. At least you have ammo on hand. Not everybody can say that. You mentioned .38 spl loads. What are the specifics on those? If 158's, they should feed.

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Mon Dec 14, 2020 6:52 pm

Yeas, the 38's are 158 gr, LSWC
3.6gr HP-38
CCI-500's
1.44"

User avatar
Rifletom
Deputy Marshal
Posts: 4010
Joined: Tue Aug 21, 2018 11:26 pm
Location: California Territory
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by Rifletom » Mon Dec 14, 2020 8:22 pm

beaverislander wrote:
Mon Dec 14, 2020 6:52 pm
Yeas, the 38's are 158 gr, LSWC
3.6gr HP-38
CCI-500's
1.44"
Ok, you should be good. The .38's may feed a bit different, but, they ought to work.

User avatar
beaverislander
Cowhand
Posts: 197
Joined: Fri Dec 04, 2020 7:58 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by beaverislander » Tue Dec 15, 2020 12:46 am

Rifletom wrote:
Mon Dec 14, 2020 8:22 pm
beaverislander wrote:
Mon Dec 14, 2020 6:52 pm
Yeas, the 38's are 158 gr, LSWC
3.6gr HP-38
CCI-500's
1.44"
Ok, you should be good. The .38's may feed a bit different, but, they ought to work.
That's great, thanks.

JVogler
Cowhand
Posts: 373
Joined: Wed May 27, 2020 7:57 pm
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by JVogler » Thu Dec 17, 2020 8:28 pm

I have shot both 38special and 357magnum in my Big Boy Brass. Have used Falcon coated and Falcon lead in the following weights: 105 tcfp, 125 grain tcfp,135 grain round nose,158 grain swc and160 grain rn. All cycled and fired fine. Only issues on certain bullets if working lever to slow occasional jam of a cartridge.

User avatar
BrokenolMarine
Ranch Foreman
Posts: 7470
Joined: Sat Nov 26, 2016 8:28 am
Location: South Central Oklahoma in the mountains
United States of America

Re: Had a bunch of 357 mag ammo, and no gun

Post by BrokenolMarine » Thu Dec 17, 2020 9:50 pm

Like your avatar
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.

I don't look back at the things I can no longer do, I just look forward to the things I still can.

Post Reply