What did you do at your reloading bench today?

[dasmoeturhead]

I started off with the Lee handloader myself in 1980. I loaded .41 and .44 magnum. Didn't like the hammer either, so I bought a Lee hand primer. I finally bought a complete Lee press, scale, and measure.
Sometime down the road when I found myself needing cash, I sold the whole outfit. I was also living in California, and had to drive 75 miles one way to shoot.
When my dad passed I got his fairly new Rock Chucker, Redding scale and measure. Just recently I bought a new Hornady powder measure, and trimmer. I really like my set up now, and I know my Dad is watching from above with a smile on his face when I'm pulling the handle on the ole' Rock Chucker.

[JEBar]

well understood on smiling pulling he handle on a Rock Chucker .... our 50+ year old Rocker Chucker is now sitting on our reloading bench by a Hornady Lock-n-Load Auto-progressive 5-station reloading press .... our sons can really churn out the ammo on it but I still find myself pulling the handle on our old green machine ....

[fortyshooter]

Since I liked how 6 grs. of Red Dot worked under a 250 gr. 45 Colt I'm going to try same load with 240 gr. 44 Magnum for some target plinkers.

[runnin n gunnin]

Started yesterday and finished today.

Dacapped, resized and trimmed 2,300 -.223, 20 45-70-, 200 -.357, 600 - 38's, and NO I did not use a Lee Hand Primer !

Next up, priming, powder and bullet's !

20200705_092639.jpg (273.63 KiB) Viewed 3406 times

[BigAl52]

Thats alot of bench time there RnG. What do you use for a trimmer on the 223

[BigAl52]

I resized some 45 colt then loaded up 50 41 mag with some XTP bullets. I also cleaned 3 45 colt pistolas.

[runnin n gunnin]

I have always used a Wilson case trimmer, great well made hand trimmer. However, for Christmas my son gave me a Lyman Brass Smith Case Trim Xpress Case Trimmer. This is the first time I have had to use it with 2,300 pieces of brass. Took a couple of minutes to adjust and worked like a charm, I love it.

Since it is only for shouldered brass, I have to use the Wilson for the 45-70, but I will never be loading 2,300 rounds of that !

I Chamfer and de-burr with the Lyman Case Prep Xpress.

[BigAl52]

I figured you were using some sort of power trimmer to do that many cases. I use a WFT trimmer chucked up in a drill. They work very well. I as well have the lyman case prep center. Found it on sale at Amazon. I love that thing.

[fortyshooter]

Have .45 Colt brass running in the tumbler for some future reloading. Waiting on a large bullet order from MB along with some .44 Special brass.
Too hot and steamy for me to shoot right now so might as well do some loading.

[Grunt67]

Got that right. We're getting Arizona heat here, miserable. I'm still trimming on the 45/70s. Have to do a few at a time, wrist giving
me fits. I know, age, LOL.

[runnin n gunnin]

We're getting Arizona heat here, miserable.

Whoa now 67, what do you mean like Arizona? I was in Tennessee in March brother, humidity killed me.
We are currently at 105 with 10% humidity, feels like . . . . well 105 but I'm not sweatin !

[Rifletom]

Ahh, you know us California types. Gets over 72, A/C goes on. Down to 68, heater. Well, not really. Just wanted to make you fellers feel better! About 87 right now. In the garage turning an old jack stand into a rifle rest. A little paint and this may just work like I hope. We'll see.

[Team Roper]

Ahh, you know us California types. Gets over 72, A/C goes on. Down to 68, heater. Well, not really. Just wanted to make you fellers feel better! About 87 right now. In the garage turning an old jack stand into a rifle rest. A little paint and this may just work like I hope. We'll see.

Hope you don't get a flat on the way to the range.

[Team Roper]

To hot to be outside so went to the cool basement and loaded up some 45 Colts with my 255 gr. Keith SWC cast bullets for my New Model Blackhawk.

[Rifletom]

Ahh, you know us California types. Gets over 72, A/C goes on. Down to 68, heater. Well, not really. Just wanted to make you fellers feel better! About 87 right now. In the garage turning an old jack stand into a rifle rest. A little paint and this may just work like I hope. We'll see.

Hope you don't get a flat on the way to the range.

All good. I'll have my wife change it!
I like this back and forth stuff. Way better than watching the news. To the loading bench!

[runnin n gunnin]

Just took my pups outside. Smarter then me, they turned around and went back in.

I'm back at the bench setting up the progressive for some .223

RT - Post a picture of your rifle rest when your done.

[Rifletom]

I'll see what I can do r-n-g. Not too hot at posting pics. Looking around for some sort of padding for the top. Have an idea or two.

[Grunt67]

We're getting Arizona heat here, miserable.

Whoa now 67, what do you mean like Arizona? I was in Tennessee in March brother, humidity killed me.
We are currently at 105 with 10% humidity, feels like . . . . well 105 but I'm not sweatin !

LOL, Mar. & July are two different animals. You're right about the humidity. Much more than Ari. Over 100 here for several days.
I'm ready for some good old Fall weather.

[Rifletom]

Fall. My favorite time of year.

[Grunt67]

Ahh, you know us California types. Gets over 72, A/C goes on. Down to 68, heater. Well, not really. Just wanted to make you fellers feel better! About 87 right now. In the garage turning an old jack stand into a rifle rest. A little paint and this may just work like I hope. We'll see.

I'd never thought about using that for a rest. See no reason why not. Thanks for the idea, Tom.