Site seems to be experiencing intermittent load issues. If site doesn't present the login screen, try clicking on 'login'
Discussion about what manufactured ammunition feeds your Henry or other firearms
-
Sir Henry
- Administrator / Owner
- Posts: 14614
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: Price County Wisconsin

Post
by Sir Henry » Mon Mar 09, 2020 9:20 pm
Ernie wrote: ↑Sun Mar 08, 2020 4:39 pm
Shot my Bond Arms Rough and Rowdy today with Winchester 2-1/2" PDX1 410 defender ammo today off hand one handed. It smarted a little but was not too bad. Shot 4 rounds and was surprised with the accuracy at 15 yards. Just shot at some clay targets so I don't have a target to show. This ammo has 3 discs and 12 BBs, would not like to be in front of this gun. Will have to get some kind of holster for carry purposes.
I shoot 2 1/2” in mine also.
Edit: I have the 3” and 2 1/2” barrels along with a .22LR and a 38/357.
I haven’t shot these in years. I don’t like how the trigger pulls down and not back.

- E4284FD6-2FE5-44FC-B3F8-45DD3E4A9448.jpeg (210.89 KiB) Viewed 5387 times
Hi, my name is Gene and I'm a Henryholic from Wisconsin.
Range Reporter: Henry Repeater
-
Cowboy Gun Fan
- Cowboy
- Posts: 1805
- Joined: Mon Mar 21, 2016 9:42 am
- Location: SW Virginia

Post
by Cowboy Gun Fan » Mon Mar 09, 2020 11:23 pm
Ernie wrote: ↑Mon Mar 09, 2020 7:46 pm
Found a holster sold by Bond Arms at Bucksnort Outfitters. BAD drivers holster, smooth lined, 3" for the Rowdy. Little pricey at $110 but they look like they conceal well and I wanted something better than just shoving the gun in my pocket. Will show a pic when it gets here probably next week. Did you get a holster CGF?
Sorry, it seems I hijacked your post.
No, that's fine, post away. It's nice to just keep a thread going.
No, no holster yet. I'll be interested in seeing the one that you got.
In the meantime, I bought some 200 Grain HSM 45 LC's, but haven't tried them yet.
NRA Member
-
PT7
- Drover
- Posts: 4889
- Joined: Mon Mar 21, 2016 8:32 am
- Location: The Show-Me State

Post
by PT7 » Tue Mar 10, 2020 10:05 am
Ernie wrote: ↑Mon Mar 09, 2020 7:46 pm
Found a holster sold by Bond Arms at Bucksnort Outfitters. BAD drivers holster, smooth lined, 3" for the Rowdy. Little pricey at $110 but they look like they conceal well and I wanted something better than just shoving the gun in my pocket. Will show a pic when it gets here probably next week. Did you get a holster CGF?
Sorry, it seems I hijacked your post.
Ernie,
I had a BAD for my BASS IV. You're right. A little spendy as a lot of BA accessories are, but it is quality leather and top-notch construction. I carried on the belt in a right hand cross-draw position. Would have liked more of a holster cant bringing the grip upward, but it was what it was. One suggestion. A strong belt is needed as the derringers are heavy dudes. You don't want it to pull the belt away too much for CCW.
This was my set up. Hope you like yours.
PT7

- DSCN0440.JPG (114.62 KiB) Viewed 5382 times
~Пока~
-
Cowboy Gun Fan
- Cowboy
- Posts: 1805
- Joined: Mon Mar 21, 2016 9:42 am
- Location: SW Virginia

Post
by Cowboy Gun Fan » Tue Mar 10, 2020 10:51 am
Sir Henry wrote: ↑Mon Mar 09, 2020 9:20 pm
I don’t like how the trigger pulls down and not back.
When I shot mine, I didn't notice any difference. I really like the idea of a trigger guard though. I notice that you have both. I'll have to pay a little more attention next time if I can see a difference, but so far it never even crossed my mind.
Nice looking collection you have there. Like the Grips.
NRA Member
-
Ernie
- Drover
- Posts: 2542
- Joined: Thu Mar 07, 2019 8:07 pm
- Location: Southwestern Lower Michigan

Post
by Ernie » Tue Mar 10, 2020 4:26 pm
Ernie,
I had a BAD for my BASS IV. You're right. A little spendy as a lot of BA accessories are, but it is quality leather and top-notch construction. I carried on the belt in a right hand cross-draw position. Would have liked more of a holster cant bringing the grip upward, but it was what it was. One suggestion. A strong belt is needed as the derringers are heavy dudes. You don't want it to pull the belt away too much for CCW.
This was my set up. Hope you like yours.
PT7
Where did you get the sleeve for your grip? Seems it might help take the sting out a bit, I can still feel a bit in the pad of my thumb.
-
PT7
- Drover
- Posts: 4889
- Joined: Mon Mar 21, 2016 8:32 am
- Location: The Show-Me State

Post
by PT7 » Tue Mar 10, 2020 5:34 pm
Ernie wrote: ↑Tue Mar 10, 2020 4:26 pm
Where did you get the sleeve for your grip? Seems it might help take the sting out a bit, I can still feel a bit in the pad of my thumb.
It's a Hogue Wrap Around Grip and got mine from BA. Here is their web link.
https://www.bondarms.com/shop/grips/hog ... /#descPane
PT7
~Пока~
-
Cowboy Gun Fan
- Cowboy
- Posts: 1805
- Joined: Mon Mar 21, 2016 9:42 am
- Location: SW Virginia

Post
by Cowboy Gun Fan » Mon Mar 30, 2020 10:49 pm
I finally got to try some of the 200 Grain HSM 45 LC's in my Rowdy on Saturday.
They weren't a big difference, but yet a nicer difference (in comparison to the American Eagle 225's).
Although I will put both to good use, I believe I'll be sticking to the HSM's. They did smoke more like I read somewhere that they would. True to the Cowboy loads of the old days, lol.
NRA Member
-
Ernie
- Drover
- Posts: 2542
- Joined: Thu Mar 07, 2019 8:07 pm
- Location: Southwestern Lower Michigan

Post
by Ernie » Sun Apr 05, 2020 10:26 am

- IMG_0744.jpg (229.15 KiB) Viewed 4905 times
my holster and cartridge holder for my Rowdy. Cartridge holder for 30 06, is a little long but works for me. Found 2 shells fit in the watch pocket of my jeans very comfortably.
Last edited by
Ernie on Sun Apr 05, 2020 11:57 am, edited 1 time in total.
-
BigAl52
- Forum Ambassador
- Posts: 15048
- Joined: Sun Oct 23, 2016 12:43 pm
- Location: Evans,Colorado

Post
by BigAl52 » Sun Apr 05, 2020 10:35 am
I was lookin at the Snake Slayer IV. Whats the trigger pull like on these. I looked at some Youtube videos cant really make up my mind on one.
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
Ernie
- Drover
- Posts: 2542
- Joined: Thu Mar 07, 2019 8:07 pm
- Location: Southwestern Lower Michigan

Post
by Ernie » Sun Apr 05, 2020 1:52 pm
Checked mine and I get about 8 lbs
-
PT7
- Drover
- Posts: 4889
- Joined: Mon Mar 21, 2016 8:32 am
- Location: The Show-Me State

Post
by PT7 » Sun Apr 05, 2020 4:47 pm
Ernie wrote: ↑Sun Apr 05, 2020 10:26 am
my holster and cartridge holder for my Rowdy. Found 2 shells fit in the watch pocket of my jeans very comfortably.
Your Rowdy sure is dressed up purty. That sharp-lookin' and quality leather will last a long time!

~Пока~
-
RanchRoper
- Forum Ambassador
- Posts: 12953
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Sun Apr 05, 2020 7:05 pm
For factory 45 Colt, Black Hills is some of the nicest ammo I have shot.
Pedersoli Frontier Flintlock .50
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully