44 BBB, and 250 Keith; Update

[Vaquero]

The rest

20200127_112507.jpg (200.04 KiB) Viewed 2825 times

20200127_112541.jpg (203.38 KiB) Viewed 2825 times

The ole rifle

20200127_113026.jpg (202.01 KiB) Viewed 2825 times

RP

[BigAl52]

Man 19.4 looks real good to me at 50 yards. Thats some good shooting Randy

[Vaquero]

Kind of a toss up between it and 19.3, I sure that one straggler in the 19.4 was operator error.
But that's about all I can do without a scope.

Thanks for the kind words.

RP

[BigAl52]

Im pretty sure that those loads would be ringin steel at Randys house out dat barn

[fortyshooter]

Great results with the 19.4 and 19.3 ! I will have to try those loads. Thanks for all that test work too!

[fortyshooter]

I just did some measuring and found that...that bullet seated to 1.635 in the Magnum case has the same powder space as seated to
1.620 in a .44 Special case when seated to the crimp groove!
Interesting!

[Vaquero]

I don't have any special brass all mine are magnum.
I will be trying some more of those two.
Your right though Al, with either of those should work easily.

RP

[fortyshooter]

In .44 Special case same as the famous Elmer Keith load but with 18.5 gr. of the old 2400 powder.
.44 Special case on left and .44 Mag on right with 250 K bullet seated at roughly 1.635

[Rifletom]

Dang Randy, do believe you have a load or two for that .44 now. That is some fine shooting right there. WTG!

[BigAl52]

Looks like we might see a Forty range report with some of the 250's in his 44.