Site seems to be OK. Load issue should be resolved now.
Put your range reports for all brands and types of firearms and other items.
-
RanchRoper
- Forum Ambassador
- Posts: 12958
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Sun Sep 01, 2019 5:51 pm
No big story today, just 1 little 8" target with 50 rounds on it through my 1860 Henry in 45 Colt. My reloads 6.7 gn of Universal with 250 gr LRNFP bullets.
Shooting 100 yds, from 1 knee position. No wind again today so I am able to zero in not too bad. I use my little binoculars to check on how I'm doing as I shoot. Once I saw the flyers around the edge I was able to correct it and at least get on the black target for the most part. Pulling left a bit which I tend to do. Couple of other guys there shooting bolt guns with scopes, so I guess they must think I'm nuts with open sights, but oh well.
Anyhow, shoot safe and often, RR
-
Attachments
-

- FD 19C.jpg (186 KiB) Viewed 1630 times
-

- 20190901_153333_resized_1.jpg (133.18 KiB) Viewed 1630 times
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
CT_Shooter
- Administrator emeritus
- Posts: 5769
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut

Post
by CT_Shooter » Sun Sep 01, 2019 6:09 pm
Awesome... 100 yards, open sights! Wow.
H006M BBB .357 - H001 Classic .22LR - Uberti/Taylors & Co. SmokeWagon .357 5.5" - Uberti/Taylors & Co. RanchHand .22LR 5.5" - Colt King Cobra Carry 2" - Colt Official Police 38spl 4"
-
JEBar
- Town Marshal / Deputy Admin
- Posts: 20434
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Post
by JEBar » Sun Sep 01, 2019 6:30 pm
nicely done, as usual .... you've fired as many or much more lead bullets through your rifle as anyone I know .... have you noticed much, if any, lead buildup in its barrel

-
PT7
- Drover
- Posts: 4889
- Joined: Mon Mar 21, 2016 8:32 am
- Location: The Show-Me State

Post
by PT7 » Sun Sep 01, 2019 6:38 pm
RanchRoper wrote: ↑Sun Sep 01, 2019 5:51 pm
Shooting 100 yds, from 1 knee position. No wind again today so I am able to zero in not too bad. Couple of other guys there shooting bolt guns with scopes, so I guess they must think I'm nuts with open sights, but oh well.
Anyhow, shoot safe and often, RR
An 8" target @ 100 yards is definitely leaning toward a bigger story, RR. The only thing that is "little" is the target way out there!! I wonder what the other fellows would think if they compared their targets with yours? If they were at all experienced shooters and good with their rifles, they probably should understand
you are not nuts. You're the "kneeling iron man."
Great shootin'
PT7
~Пока~
-
BigAl52
- Forum Ambassador
- Posts: 15048
- Joined: Sun Oct 23, 2016 12:43 pm
- Location: Evans,Colorado

Post
by BigAl52 » Sun Sep 01, 2019 7:00 pm
Im not sure they would think you are nuts. There probably struggling to even come close to shooting that good on 20 power
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
Ojaileveraction
Post
by Ojaileveraction » Sun Sep 01, 2019 7:02 pm
8 inches! That's another great target.
Pulling left a bit which I tend to do.
A <1/32 inch tap to the right on that rear sight and you be right on center.
-
RanchRoper
- Forum Ambassador
- Posts: 12958
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Sun Sep 01, 2019 7:29 pm
JEBar wrote: ↑Sun Sep 01, 2019 6:30 pm
nicely done, as usual .... you've fired as many or much more lead bullets through your rifle as anyone I know .... have you noticed much, if any, lead buildup in its barrel
I clean the barrel quite often, every couple of sessions. There is lead, but after a couple of wet barrel mops and a patch or two I can get clean dry patches. The chamber gets dirty though, and needs to be cleaned out thoroughly. However, I popped the side plate on the toggle link action not too long ago and it was pretty darn clean in there. Just oiled it and put the cover back on.
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
RanchRoper
- Forum Ambassador
- Posts: 12958
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Sun Sep 01, 2019 7:31 pm
Ojaileveraction wrote: ↑Sun Sep 01, 2019 7:02 pm
8 inches! That's another great target.
Pulling left a bit which I tend to do.
A <1/32 inch tap to the right on that rear sight and you be right on center.
Agreed, it is soooooo hard to judge and adjust at the that distance. I am really excited to try my new 1885 High Wall with a rear tang sight and see if I can actually get groups at 100+ yds. We'll see.
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
North Country Gal
- Firearms Advisor
- Posts: 6823
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin

Post
by North Country Gal » Sun Sep 01, 2019 7:45 pm
RR, I doubt very much that those guys with bolt guns and scopes think you're nuts. If anything, I suspect some of them are jealous, but I'll bet a lot more of them are just plain curious to see someone still shooting in the old way. So rare to see, anymore. Hold your head high, cowboy. That kind of shooting is a thing of beauty.
Yes, I do think a tang peep and set trigger on that 1885 will let you stretch out to 200 yards, no prob. Might want to develop some hotter loads, though, to flatten the trajectory and for sure, an 1885 can handle any kind of 45 Colt load.
Last edited by
North Country Gal on Sun Sep 01, 2019 7:49 pm, edited 1 time in total.
-
RanchRoper
- Forum Ambassador
- Posts: 12958
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Sun Sep 01, 2019 7:48 pm
Appreciate the kind words all. No worries, I wouldn't know one end of a scope from another....so it's iron sights to infinity and beyond...
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
RanchRoper
- Forum Ambassador
- Posts: 12958
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Post
by RanchRoper » Sun Sep 01, 2019 8:18 pm
North Country Gal wrote: ↑Sun Sep 01, 2019 7:45 pm
RR, I doubt very much that those guys with bolt guns and scopes think you're nuts. If anything, I suspect some of them are jealous, but I'll bet a lot more of them are just plain curious to see someone still shooting in the old way. So rare to see, anymore. Hold your head high, cowboy. That kind of shooting is a thing of beauty.
Yes, I do think a tang peep and set trigger on that 1885 will let you stretch out to 200 yards, no prob. Might want to develop some hotter loads, though, to flatten the trajectory and for sure, an 1885 can handle any kind of 45 Colt load.
That's interesting on the loads for the 1885....been looking at some loads for it already. I have loaded some 250 gr a little hotter and marked the box "1885 only".
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
-
JEBar
- Town Marshal / Deputy Admin
- Posts: 20434
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Post
by JEBar » Sun Sep 01, 2019 8:28 pm
RanchRoper wrote: ↑Sun Sep 01, 2019 7:29 pm
I clean the barrel quite often, every couple of sessions. There is lead, but after a couple of wet barrel mops and a patch or two I can get clean dry patches. The chamber gets dirty though, and needs to be cleaned out thoroughly. However, I popped the side plate on the toggle link action not too long ago and it was pretty darn clean in there. Just oiled it and put the cover back on.
info appreciated .... you've done an excellent job of finding and producing a load that really works well in your firearms
-
dasmoeturhead
- Cowboy
- Posts: 1114
- Joined: Sun Aug 28, 2016 9:41 am
- Location: East Tennessee

Post
by dasmoeturhead » Mon Sep 09, 2019 10:33 am
Meat on the table shootin.
I'm a Ship that can't be Salvaged!