RP
Site seems to be OK. Load issue should be resolved now.
Still getting high on the job...
- Vaquero
- Ranch Boss
- Posts: 12124
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Still getting high on the job...
Oh yeah, fooled ya. Different kind of high.

RP
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- Sir Henry
- Administrator / Owner
- Posts: 14622
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: Price County Wisconsin

Re: Still getting high on the job...
Can I borrow one of those ladders?
Hi, my name is Gene and I'm a Henryholic from Wisconsin.
Range Reporter: Henry Repeater
Range Reporter: Henry Repeater
- fortyshooter
- Ranch Foreman
- Posts: 7087
- Joined: Sat Dec 09, 2017 10:37 am
- Location: Va.

Re: Still getting high on the job...
Looks like you have that well planned out! No helper?
- Vaquero
- Ranch Boss
- Posts: 12124
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: Still getting high on the job...
Thanks, we've been doing it for a long time.fortyshooter wrote: ↑Tue Jun 04, 2024 11:43 amLooks like you have that well planned out! No helper?
Yes, he was on the ground and the one who took the picture of me.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: Still getting high on the job...
Old men dont belong on ladders.
Don't let the old man in
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
Re: Still getting high on the job...
Almost 30 years ago, I was going up a ladder to go on the roof to blow off leaves.
I woke up in Beaufort Memorial Hospital in Beaufort, SC with broken ribs, a concussion and staples holding my scalp together.
That was when I was in my 40's and I avoid ladders like the plague at 75.
Be careful out there Vaquero and others.
I woke up in Beaufort Memorial Hospital in Beaufort, SC with broken ribs, a concussion and staples holding my scalp together.
That was when I was in my 40's and I avoid ladders like the plague at 75.
Be careful out there Vaquero and others.
Re: Still getting high on the job...
Don't be like this guy.


Re: Still getting high on the job...
I’d have to get the other kind of high to climb up where you are

- Vaquero
- Ranch Boss
- Posts: 12124
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: Still getting high on the job...
Been there and done that too
Some 30 years ago that was an every day thing.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: Still getting high on the job...
Heights never bothered me, I was always the guy who had to go up on the lift to change the gym light bulbs, used to walk right along the edge of a sloped roof to blow leaves out of the rain gutters. When I was a kid I climbed most of the big trees in the neighborhood and my mom and older brother told me they once caught me going up a ladder to a neighbors roof before I could even walk.
Now I'm very unsteady on my feet when I get winded and while I will still go up a ladder onto a roof I'm a lot more cautious.
Now I'm very unsteady on my feet when I get winded and while I will still go up a ladder onto a roof I'm a lot more cautious.
- Vaquero
- Ranch Boss
- Posts: 12124
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: Still getting high on the job...
As a kid, we had a huge Walnut tree in the backyard, I would climb it as high as the limbs would hold my weight.dave77 wrote: ↑Tue Jun 04, 2024 9:35 pmHeights never bothered me, I was always the guy who had to go up on the lift to change the gym light bulbs, used to walk right along the edge of a sloped roof to blow leaves out of the rain gutters. When I was a kid I climbed most of the big trees in the neighborhood and my mom and older brother told me they once caught me going up a ladder to a neighbors roof before I could even walk.
Now I'm very unsteady on my feet when I get winded and while I will still go up a ladder onto a roof I'm a lot more cautious.
Later there was a two lane hwy at the end of the road we lived on, about 100 yds. from that intersection was a bridge over a set of railroad tracks.
Probably over 100 ft. above the tracks, I would walk the concrete banister. Probably 8-10 inches wide. Got some looks from the passer byers.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
- cooperhawk
- Ranch Foreman
- Posts: 5624
- Joined: Sat Jan 12, 2019 3:27 pm
- Location: 20 miles south of the twin cities.

Re: Still getting high on the job...
I used to climb ladders all the time but now the Wife says to stay on the ground old fart. 
Retired FAA Air Traffic Control Supervisor
VFW (Life Member), VVA (Life Member)
Legion (Life Member), NRA (Life Member)
U S Army Aviation 64-67, Vietnam MACV 65-66
VFW (Life Member), VVA (Life Member)
Legion (Life Member), NRA (Life Member)
U S Army Aviation 64-67, Vietnam MACV 65-66
Re: Still getting high on the job...
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
Re: Still getting high on the job...
I used to do heli safety and rigging for film, as well as climbing stunt work. I am not bothered (obviously) by heights.
RP, you doing siding too or just soffit/facia?
RP, you doing siding too or just soffit/facia?
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
- Vaquero
- Ranch Boss
- Posts: 12124
- Joined: Mon Mar 21, 2016 12:56 am
- Location: Somewhere between Memphis & Nashville

Re: Still getting high on the job...
On that particular job, we just did the soffit and fascia, another crew is hanging the Hardy board siding.
We do vinyl siding, vertical or horizontal, and the vinyl Shake sidings, no Hardy stuff.
RP
Monte Walsh "You have No idea how little I care".
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Ain't No Apologies for My Temperament
Si vis pacem, para bellum
H001, H006, H012
Re: Still getting high on the job...
That’s good. Hardy is nasty to work with, and HEAVY. It’s nice once it’s on the building though. I prefer the look of it to vinyl, but neither one beats the look of cedar. Practical wise, I would pick Hardy.
SGC .22 LR Stripped and oiled up
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
BBSC .357 w Skinner Express & Patridge
BBSC .44 Magnum with Skinners
Marlin 1895GS .45-70 w RPP Cloverleaf
Marlin 336BL .30-30 w Skinner LoPro 2 and Sig 2-7x
1912 Winchester 1894 .30 WCF
- BrokenolMarine
- Ranch Foreman
- Posts: 7471
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains

Re: Still getting high on the job...
The docs don't allow me on ladders any longer, but I did roofing work when I helped to build additions with my stepfather all thru high school. Later, thru my Marine Corps Career, I worked atop the helos, often when they were hanging over the edge of the flight deck of the carrier, 13 stories above the water.
Yeah, not really afraid of the heights.
We'd also hang out of the helo, wearing the gunner's belt when hoisting or shooting...
I miss it all.
Congrats on still being able to do the work.
Yeah, not really afraid of the heights.
Congrats on still being able to do the work.
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
I don't look back at the things I can no longer do, I just look forward to the things I still can.
by the way he treats those who can do nothing for him.
I don't look back at the things I can no longer do, I just look forward to the things I still can.
