Page 1 of 1
.410 lever with side add ( non-X)
Posted: Tue Dec 03, 2024 9:48 am
by Mickey
New and for home defense .410 lever with side add (non-X) wish to add laser or laser/light combo.
Not having any luck finding one.
Thank you
Re: .410 lever with side add ( non-X)
Posted: Tue Dec 03, 2024 1:28 pm
by 5shot
Henry shows such a device in the "Parts" section on their website for the H006 and H012. You could check with Henry cust. svc. or Skinner Sights to see if this is compatible with the .410 or if there exists some device that is.
I searched unsuccessfully for something on this order before I got the X-Models.
Re: .410 lever with side add ( non-X)
Posted: Tue Dec 03, 2024 2:38 pm
by Mags
This is what Skinner says about the mount. Henry offers only the 675. Either can be bought from Skinner.
Model numbers (675 and 650) reflect the tube diameters these are designed to fit. If you have a model not listed here, measure your tube and decide accordingly. .650" and .675"
https://skinnersights.com/collections/h ... 2466&_ss=c
Re: .410 lever with side add ( non-X)
Posted: Wed Dec 04, 2024 9:50 pm
by fortyshooter
I made my own light mount several years ago for the 45 Colt x model. A bit of the light illuminates the front green dot sight which is great to have!
Re: .410 lever with side add ( non-X)
Posted: Thu Dec 05, 2024 7:07 am
by Vaquero
fortyshooter wrote: ↑Wed Dec 04, 2024 9:50 pm
I made my own light mount several years ago for the 45 Colt x model. A bit of the light illuminates the front green dot sight which is great to have!
Looks good, you are so handy there forty.
RP