Page 1 of 1
Pretty Good Day
Posted: Sun Nov 04, 2018 7:15 pm
by Mistered
Got out to send a few rounds downrange today. Kinda windy but mostly clear and I managed these groups. The first is with my Winchester 100 year Commemorative and this is three shots at 50 yards benchrested - like 3/8" of an inch!

- img002.jpg (113.48 KiB) Viewed 2293 times
Next is six with my BBB .357 also benchrested. Not as good but it was getting windy.

- img001.jpg (57.19 KiB) Viewed 2293 times
I made a slight change which I think improved my groups - I changed to .093 aperture diameter from a .125 on the Williams sights on both rifles and it gave me a sharper view of my front sights.
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 7:19 pm
by ESquared
Very nice shooting, that's for sure! Peeps on both rifles? Or a scope on the 30-30?
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 7:21 pm
by Mistered
Or a scope on the 30-30?
That would be sacrilege on this particular rifle!
Williams receiver sights on both.
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 8:32 pm
by North Country Gal
Very impressive groups, especially with that 30-30. Love it.
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 8:37 pm
by JEBar
Impressive .... I'd be happy with either target ...

Re: Pretty Good Day
Posted: Sun Nov 04, 2018 8:48 pm
by Mistered
Very impressive groups, especially with that 30-30.
This is literally the tightest group I have ever shot with a 30-30.
I attribute it to the ammo, gun, narrower aperture for the sight and maybe not particularly important but I have been figuring a way to increase the LOP on this rifle as the stock was a bit short for me.
Well i have been thinking of ways to 'lengthen' the stock but in the meantime I was scrounging around through my gun junk and found an older Winchester plastic buttplate and it fit perfectly over the top of the steel one the stock so it added about a 1/2" which really helped.
I could still use about another 1/2" so this winter I'll fab a piece of 1/2" brass flat bar into an extension and with the plastic Winchester butt plate will be about right.
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 9:59 pm
by BigAl52
Looks like pine cones and forest targets could be in trouble. Cast or jacketed in the 30-30
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 10:15 pm
by Mistered
Cast or jacketed in the 30-30
The Speer 100 Grain half jacket 'Plinkers' - an absolute great bullet for light 30-30 loads.
Re: Pretty Good Day
Posted: Sun Nov 04, 2018 10:16 pm
by Mistered
Looks like pine cones and forest targets could be in trouble.
And Jackrabbits on the desert this winter!!
Re: Pretty Good Day
Posted: Mon Nov 05, 2018 1:44 am
by Ojaileveraction
Good day indeed!
I'd take that. Jackrabbits beware.
Re: Pretty Good Day
Posted: Mon Nov 05, 2018 2:53 am
by Ojaileveraction
Looks like they are all touching to me, closer to .308 inches center to center.
Re: Pretty Good Day
Posted: Mon Nov 05, 2018 10:26 am
by North Country Gal
Mistered wrote:Very impressive groups, especially with that 30-30.
This is literally the tightest group I have ever shot with a 30-30.
I attribute it to the ammo, gun, narrower aperture for the sight and maybe not particularly important but I have been figuring a way to increase the LOP on this rifle as the stock was a bit short for me.
Well i have been thinking of ways to 'lengthen' the stock but in the meantime I was scrounging around through my gun junk and found an older Winchester plastic buttplate and it fit perfectly over the top of the steel one the stock so it added about a 1/2" which really helped.
I could still use about another 1/2" so this winter I'll fab a piece of 1/2" brass flat bar into an extension and with the plastic Winchester butt plate will be about right.
A slip on or lace on recoil pad might be another option. I use the leather lace on style on my Contender carbines to get a bit more LOP I like. I get these from Buffalo Arms. Do a great job of reducing recoil, too, when shooting one of the big boomers on the carbine.

Re: Pretty Good Day
Posted: Mon Nov 05, 2018 10:40 am
by RanchRoper
Very good shooting. Well done.
Re: Pretty Good Day
Posted: Mon Nov 05, 2018 10:46 am
by Mistered
A slip on or lace on recoil pad might be another option.
I m seriously considering fitting a brown, hard rubber solid style butt pad on it. The stock is not the original (nor is the steel butt plate) so its not like I will be dealing with any value issues. I wont be altering the stock so if I ever wanted to put the steel butt plate back on for any reason I could.
Maybe something like this.

- 61ucRiTnZ9L._SL1151_.jpg (75.73 KiB) Viewed 1924 times
Re: Pretty Good Day
Posted: Mon Nov 05, 2018 3:40 pm
by shootinthecinders
Mistered wrote:Looks like pine cones and forest targets could be in trouble.
And Jackrabbits on the desert this winter!!
Do you eat jackrabbit? I know some do and most don’t. I’ve never eaten it but should try it sometime. Although that’s dependent on what the jackrabbit has been eating lol.
BTW, great shooting!
Re: Pretty Good Day
Posted: Mon Nov 05, 2018 3:52 pm
by Mistered
Do you eat jackrabbit?
No but like you I know a some who do and they claim its pretty good in a stew - but I'll leave them for the coyotes and vultures!