Site seems to be OK. Load issue should be resolved now.
Stand and Shoot
- RanchRoper
- Forum Ambassador
- Posts: 12958
- Joined: Mon Mar 21, 2016 12:14 am
- Location: Land of Shining Mountains, Alberta

Re: Stand and Shoot
Good job. Distance?
Kibler Colonial Flintlock .50
Ohkínohkomit - Shoot skillfully
- JEBar
- Town Marshal / Deputy Admin
- Posts: 20436
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC

Re: Stand and Shoot
100 meters = just under 110 yards .... nicely done ... 
-
Ojaileveraction
Stand and Shoot
Half size pigs at 50 meters. I count 8 hits out of Ten shots. I'm working on doing this in a match.
Re: Stand and Shoot
I second that, nice shooting and a very nice looking rifle. Octagon barrels are beautiful.
Made by Henry, Or Not Made At All
- North Country Gal
- Firearms Advisor
- Posts: 6823
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin

Re: Stand and Shoot
Stand and shoot sounds great to me. My favorite way to shoot.
Love the 22 mag for 100 yard work. Nice shooting, too.
Love the 22 mag for 100 yard work. Nice shooting, too.
-
Ojaileveraction
Stand and Shoot
Decided to try my Henry Center fire in the Big Bore match Saturday. So I had a practice session this morning. 357 mag 125gr soft point over H110.
Full size Chickens at 50 mteres
Full size Pigs at 100 meeters.
- CT_Shooter
- Administrator emeritus
- Posts: 5769
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut

Re: Stand and Shoot
Thanks for the great photos and updates. Good luck at the match tomorrow! I'm looking forward to reading your report.Ojaileveraction wrote:Decided to try my Henry Center fire in the Big Bore match Saturday. So I had a practice session this morning. 357 mag 125gr soft point over H110.
I also reload and shoot a .357 BBB, but I've been reluctant to use H110 with 125gr jacketed bullets because they require so much powder. I've read that 16.2 gr of H-110 is a 100% full case (http://rugerforum.net/reloading/28008-h ... post291744). To avoid that (I've only got a few years experience and I'm more than a bit cautious), I've used other powders including Unique, Universal, and HP-38 with those bullets.
Have you been using H110 with 125s for a while?
H006M BBB .357 - H001 Classic .22LR - Uberti/Taylors & Co. SmokeWagon .357 5.5" - Uberti/Taylors & Co. RanchHand .22LR 5.5" - Colt King Cobra Carry 2" - Colt Official Police 38spl 4"
-
Ojaileveraction
Re: Stand and Shoot
CT_Shooter
I use the 1 book one Caliber load books.
I first reloaded 357 with Unique and HP-38 but then wanted to try a slower powder that filled the case better.
I always start low and work up, keeping a eye out for any over pressure signs.
I can feel a difference shooting but haven't seen a difference at the target.
While experimenting with powders and bullet weights I've also been trying different sights. So results can sometimes be a mish-mash.
Internet forum loading data should be tempered with data published by the people that make the bullets and powder you use.
I will tell you that while 16.2 gr H110 maybe a compressed load , maybe, it doesn't fill the case.
I use the 1 book one Caliber load books.
I first reloaded 357 with Unique and HP-38 but then wanted to try a slower powder that filled the case better.
I always start low and work up, keeping a eye out for any over pressure signs.
I can feel a difference shooting but haven't seen a difference at the target.
While experimenting with powders and bullet weights I've also been trying different sights. So results can sometimes be a mish-mash.
Internet forum loading data should be tempered with data published by the people that make the bullets and powder you use.
I will tell you that while 16.2 gr H110 maybe a compressed load , maybe, it doesn't fill the case.
- CT_Shooter
- Administrator emeritus
- Posts: 5769
- Joined: Mon Mar 21, 2016 8:42 am
- Location: Connecticut

Re: Stand and Shoot
I agree. I never use data other than is published. I really like H110 for 158gr jacketed bullets, but I load them using data for revolvers rather than for rifles, so that I can use them in both; revolvers have a starting charge that is quite a bit more than the starting charge for rifles and I like to stay in the middle of the range (I told you I was more than a bit cautious).Ojaileveraction wrote: Internet forum loading data should be tempered with data published by the people that make the bullets and powder you use.
Again, good luck at the match tomorrow. It should be a lot of fun.
H006M BBB .357 - H001 Classic .22LR - Uberti/Taylors & Co. SmokeWagon .357 5.5" - Uberti/Taylors & Co. RanchHand .22LR 5.5" - Colt King Cobra Carry 2" - Colt Official Police 38spl 4"
Re: Stand and Shoot
Will you have someone there to take some pictures when you compete? That would be really cool to see.
Enjoy yourself, be safe, shoot well, and "bring home the gold!"
Enjoy yourself, be safe, shoot well, and "bring home the gold!"
~Пока~
-
Ojaileveraction
Re: Stand and Shoot
Between helping set up Rim Fire, Pistol Caliber and the Big Bore, I just realized that's 120 targets, and then helping new Shooters and acting as an RSO I didn't get any pictures or shoot any scoring shots.
Still. I had a great day shooting. We shoot a "Shot Gun" style match. Shooters start at differen target stations but progress in the same order. I would take an empty spot and take ten shots in a two minuts stage. I rarely get to pratice on standing targets like this and I was able to Shoot big bore targets with the Marlin 30-30 and the Henry 357. Did better by far with the 357, even knocking down a couple Rams . Also PC targets with the 22 mag Octagon.
Of corse we had to pick-up and put away all those tagets afterwards.
Still. I had a great day shooting. We shoot a "Shot Gun" style match. Shooters start at differen target stations but progress in the same order. I would take an empty spot and take ten shots in a two minuts stage. I rarely get to pratice on standing targets like this and I was able to Shoot big bore targets with the Marlin 30-30 and the Henry 357. Did better by far with the 357, even knocking down a couple Rams . Also PC targets with the 22 mag Octagon.
Of corse we had to pick-up and put away all those tagets afterwards.