Site seems to be experiencing intermittent load issues. If site doesn't present the login screen, try clicking on 'login'

Heads up for 1911 users

Tell us how you do it
Post Reply
User avatar
clovishound
Drover
Posts: 2520
Joined: Wed Apr 13, 2016 4:18 pm
Location: Summerville SC
United States of America

Heads up for 1911 users

Post by clovishound » Tue Jul 30, 2019 7:33 pm

Was at the range today with the Pup.

She had two failure to fire. Looked like a weak strike. Wondered if it was the Springfield 1911, or my reloading, IE not seating the primer properly.

Got it home and did a disassemble of the firing pin and extractor. Found that the one piece firing pin spring is now a two piece.

Was looking online for a replacement, and looked at Wilson Combat. They recommend replacing every 5,000 rounds.

Oops, I have several times than that on the Springfield. Never thought about firing pin springs as normal maint. Recoil springs, yes.

Will look for a local replacement tomorrow, otherwise I'll order a couple.
There is, I think, humor here which does not translate well from English to sanity. - Sanya

User avatar
BrokenolMarine
Ranch Foreman
Posts: 7471
Joined: Sat Nov 26, 2016 8:28 am
Location: South Central Oklahoma in the mountains
United States of America

Re: Heads up for 1911 users

Post by BrokenolMarine » Tue Jul 30, 2019 7:48 pm

Words of wisdom... I replaced mine at the start of each competition season. The 45 didn't have near the round count as the three revolvers, but PM prevents (ah, helps prevent,) unexpected failures. I didn't need to lose points I didn't have to.
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.

I don't look back at the things I can no longer do, I just look forward to the things I still can.

User avatar
North Country Gal
Firearms Advisor
Posts: 6823
Joined: Thu Apr 07, 2016 12:46 pm
Location: northern Wisconsin
United States of America

Re: Heads up for 1911 users

Post by North Country Gal » Tue Jul 30, 2019 7:57 pm

Good tip. Thanks. Have a ways to go, what with revolvers dominating our shooting, more than the 1911s.

User avatar
clovishound
Drover
Posts: 2520
Joined: Wed Apr 13, 2016 4:18 pm
Location: Summerville SC
United States of America

Re: Heads up for 1911 users

Post by clovishound » Wed Jul 31, 2019 4:35 pm

Well, I picked up a new spring today. Installed it, and went back to the range and ran about 20 rounds through.

Everything seemed to work as advertised. Will probably order a couple of the Wilson Combat Chromium Silicon springs and keep them on hand.
There is, I think, humor here which does not translate well from English to sanity. - Sanya

Post Reply