Henry Talley 1" scope mounts

[Hennrrraaaayyyyy]

Hi there..very new member here .
I'm just wondering what scopes folks mount on talleys 1" rings which screw right on top of reciever of H010.
Originally I wanted to put a scout scope but since no rail/mounts being available for scout scope, decided to go with regular 3-4" eye relief scope. I tried vortex 2-7×32
on low rings but the bell of scope hits the buckhorn site and the scope can't sit in the ring. I measured for medium height rings in same and they are only 10'th of a inch high which agsin seems to me is going to be problem. Trying to see what scopes these talley rings cam accomodate without removing rear buckhorm site amd using dovetail blank. Thank you once again for all your positive input!

[Hennrrraaaayyyyy]

https://henrypride.com/products/talley- ... ing-930336

[BigAl52]

Have you thought about a red dot.

[Hennrrraaaayyyyy]

I thought of it but if red dot, rather than tubular stylw red dot, I would much rather prefer reflex sight style ...like the obes they have fir pistols....burris fast fire iii 3 moa??

[Rifletom]

I put the Henry Talley integeral one piece mount/rings my BB steel and BB brass levers. On the steel, I put a Leupold 2-7x33mm shotgun scope on it and it fits perfectly. It clears the rear sight by about 1/32".

[Hennrrraaaayyyyy]

I put the Henry Talley integeral one piece mount/rings my BB steel and BB brass levers. On the steel, I put a Leupold 2-7x33mm shotgun scope on it and it fits perfectly. It clears the rear sight by about 1/32".

Medium size??

[Rifletom]

I believe they only come in one configuration. All I know is they work well on my two Henry lever guns.

[Hennrrraaaayyyyy]

Thabk you for suggestion. However I am looking for advice on specifically H010 steel model with the mounts in the link I posted

[Hennrrraaaayyyyy]

https://www.bhphotovideo.com/c/product/ ... us_ii.html

Not from thus websute but found this no nqme brother of leopold Fx2.5...lol ...inrerested in trying it with these duscussed talley rungs on h010...provided it clears that buckhkrn site

[Hennrrraaaayyyyy]

It was GARBAGE.

[Hennrrraaaayyyyy]

Also what size talley rings to mount leupold fx 2.5 ultralight on henrt h010. Thanks

[Hennrrraaaayyyyy]

What size rings for leupold FX 2.5 II ..as in talley rings fir h010. Thnx

[Kissmybrass]

I have a picatinny rail on my H010 so I could put whatever ring diameter and heights I want on it or even switch to a dot. Right now I have a Leupold 1.5-4 that is working out fantastically.

[markiver54]

Look at the thread " Henry Big Boy ring and base set ". I posted a pick of the Talley mount on my BBS.