Page 1 of 1
Bore sight
Posted: Sat Mar 14, 2020 5:07 pm
by Cofisher
Hey y’all. I searched for this topic, came up empty. Probably my bad. Anyone have a suggestion for a ‘cheap’ ‘quality’ boresight? Using a 357.
Re: Bore sight
Posted: Sat Mar 14, 2020 5:13 pm
by CT_Shooter
https://amazon.com/GlobalPioneer-Laser- ... 363&sr=8-4
Cofisher wrote: ↑Sat Mar 14, 2020 5:07 pm
Hey y’all. I searched for this topic, came up empty. Probably my bad. Anyone have a suggestion for a ‘cheap’ ‘quality’ boresight? Using a 357.
Re: Bore sight
Posted: Sat Mar 14, 2020 5:18 pm
by Cofisher
Saw that, mediocre reviews. Do you use it?
Re: Bore sight
Posted: Sat Mar 14, 2020 5:19 pm
by CT_Shooter
I have one like it, though not this particular item. It works well in both my .357 Revolver and my BBB.
Cofisher wrote: ↑Sat Mar 14, 2020 5:18 pm
Saw that, mediocre reviews. Do you use it?
Re: Bore sight
Posted: Sat Mar 14, 2020 5:20 pm
by BigAl52
https://www.amazon.com/StrongTools-Bore ... WEJYT47F2W
I bought one of these per one of the reviews being from a gunsmith. I like it works great. Im sure the one Stan posted would be fine my neighbor has mentioned he has used those. Mines not as cheap but I do like it.
Re: Bore sight
Posted: Sat Mar 14, 2020 5:57 pm
by JEBar
we have a Wheeler Professional Laser Bore Sighter ====>
http://henryrifleforums.com/viewtopic.p ... re+Sighter .... works well for us on a variety of calibers
Re: Bore sight
Posted: Sat Mar 14, 2020 9:49 pm
by Mags
.
Mine are made by 'Sightmark'. Amazon has them.
Cofisher wrote: ↑Sat Mar 14, 2020 5:07 pm
Hey y’all. I searched for this topic, came up empty. Probably my bad. Anyone have a suggestion for a ‘cheap’ ‘quality’ boresight? Using a 357.
Re: Bore sight
Posted: Thu Mar 19, 2020 10:46 pm
by leverjc
Pull the bolt, place in a padded vise while finding a good target lock and adjust the sights or scope. Works well for me just remember to move the sight in the opposite direction that you would with a normal target sight in.
Re: Bore sight
Posted: Fri Mar 20, 2020 10:42 am
by Ojaileveraction
leverjc wrote: ↑Thu Mar 19, 2020 10:46 pm
Pull the bolt, place in a padded vise while finding a good target lock and adjust the sights or scope. Works well for me just remember to move the sight in the opposite direction that you would with a normal target sight in.
You. Describe the origanal Bore Sighting.
Using the
bore to sight in.
Since you are not moveing the rifle, the scope has to be ajusted in the OPPOSITE direction.
To move the reticle down to the target the knob is turned in the up direction.
Same opposite left and right.