Stretched the legs on the Trapper.

[Vaquero]

Good morning, 60° here and windy, headed towards the low 70's. We made it to 77 yesterday, and I didn't dent or ding any steel. But,
I did put a few holes in some paper and plywood.
Scope is zeroed at 55 yds., and I made no adjustments. The load on the left is one ragged hole at 55yds. Hmm!
Now the H4198 load I hadn't even tried before, it was a load of another member over on the MO site.
It's a few grs under max so I just tried it.
The Hdy ftx load is pretty tight at 55yds also.

Need to redo my portable target holder, so I just leaned the plywood up against the old disc.
According to the new range finder the distance was 126.3 yds.

20250318_181315.jpg (3.31 MiB) Viewed 3301 times

RP

[rickhem]

Nice shooting!
That 4198 load sure looks good, and the RL7 ain't no slouch either.

[BigAl52]

Nice job Randy

[Hatchdog]

Nice shooting at distance with that boomer.

[Vaquero]

Thanks guys, first time at any real distance and didn't know what to expect.
I rode back over there this afternoon and took some measurements.
The Hdy factory stuff.

20250319_173133.jpg (2 MiB) Viewed 3266 times

The load that was awesome at 55.
Not bad, really, as Rick said.

20250319_173259.jpg (2.19 MiB) Viewed 3266 times

And the surprise of the day. The above right hole was the fourth shot and I knew I pulled a little on it.

20250319_173408.jpg (1.47 MiB) Viewed 3266 times

RP

[5shot]

Good shootin' on both you and the rifle!