Spring has sprung. Get out and shoot your Henry
misfeed in the 22 pump
misfeed in the 22 pump
My first post in the Henry forums so hello to everyone. The first time out with my new to me pump 22 I had a misfeed that resulted in a stuck cartridge
wedged in the mechanism. Was unable to clear at the range and could not tell if a live round or spent one. At home I was able to get out what was a live round that had the bullet almost pulled out the casing at an angle. Anyone have this happen to them, was this a freak thing or should I be concerned enough to call Henry?
wedged in the mechanism. Was unable to clear at the range and could not tell if a live round or spent one. At home I was able to get out what was a live round that had the bullet almost pulled out the casing at an angle. Anyone have this happen to them, was this a freak thing or should I be concerned enough to call Henry?
0 x
H018-410R
H001
H003T
Ho12MR
H001
H003T
Ho12MR
Re: misfeed in the 22 pump
Welcome to the forum pd5188. Did you try anymore ammo after you were able to get the live round out. Also please take a look at our how many thread and add yours to our running total. http://henryrifleforums.com/viewtopic.php?f=5&t=2019
I might also add I have a pump and havent had that issue. There is also an instructional video at the Henry site you can watch to disassemble the gun. It might not hurt to do this to give it a cleaning in case there is something left in there after digging out that round.
I might also add I have a pump and havent had that issue. There is also an instructional video at the Henry site you can watch to disassemble the gun. It might not hurt to do this to give it a cleaning in case there is something left in there after digging out that round.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- JEBar
- Town Marshal / Deputy Admin
- Posts: 19453
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: central NC
Re: misfeed in the 22 pump
welcome indeed .... delighted to have you join our forum .... sorry to hear of the issue and am looking forward to following your progress in resolving it .... be sure to follow Al's link above and add your Henry to our community's total .... feel free to jump into ongoing conversations and to start more of your own
0 x
Re: misfeed in the 22 pump
I have not shot it since, and it maybe awhile before I go back to the range. The round came out in one piece and I was able to empty the feed tube easily by dumping them out the front. I will look at the video and check closely for any residue.
0 x
H018-410R
H001
H003T
Ho12MR
H001
H003T
Ho12MR
Re: misfeed in the 22 pump
I have a pump and when I first shot I got a jam, spent cartridge wedged but I got it out. I sprayed a little Hoppe’s gun medic and have shot close to a thousand rounds with out any problems
1 x
H012C, 2 H004V, H001TMER, H004SV, H001TV, H001TLB, H003T, H005MG, H001V, H001TLP, Rossi Ranch Hand, Uberti 1860, Ubérti 1866 Goldenboy
"when you have to shoot, shoot, don't talk" Tuco
"when you have to shoot, shoot, don't talk" Tuco
- Sir Henry
- Administrator / Owner
- Posts: 12269
- Joined: Sun Mar 20, 2016 10:58 pm
- Location: Price County Wisconsin
Re: misfeed in the 22 pump
Welcome to the forum. May I ask what ammo you were shooting?
Sometimes people will have this problem with the lever action and it is because they short cycled the action. I have no experience with the pump but you might be doing the same thing.
When you pump it make sure you pump it briskly to the end and get a little bump. Now that it has jammed you might want to go easy on it which might cause it to jam moire. Next time out work the action with authority like it’s never jammed before.
Let us know if this helps.
Sometimes people will have this problem with the lever action and it is because they short cycled the action. I have no experience with the pump but you might be doing the same thing.
When you pump it make sure you pump it briskly to the end and get a little bump. Now that it has jammed you might want to go easy on it which might cause it to jam moire. Next time out work the action with authority like it’s never jammed before.
Let us know if this helps.
1 x
Hi, my name is Gene and I'm a Henryholic from Wisconsin.
Range Reporter: Henry Repeater
Range Reporter: Henry Repeater
Re: misfeed in the 22 pump
I was thinking I may have short stroked it. In my old age i needed to put a scope on it and was in the process if getting it sighted in when the jam occurred. So I was shooting with a bench rest. The next time I will take it after spray lubing the works and see what happens.
1 x
H018-410R
H001
H003T
Ho12MR
H001
H003T
Ho12MR
Re: misfeed in the 22 pump
This happened a time or 2 with my H003TM. I'm pretty sure I short-stroked it. With these pumps in particular, I've adopted a pump-it-like-you-mean-it approach, and that seems to have eliminated the issue...they respond well to a somewhat heavy hand.
0 x
Re: misfeed in the 22 pump
That little bump is what i try to feel so I don’t short stroke it.
1 x
H012C, 2 H004V, H001TMER, H004SV, H001TV, H001TLB, H003T, H005MG, H001V, H001TLP, Rossi Ranch Hand, Uberti 1860, Ubérti 1866 Goldenboy
"when you have to shoot, shoot, don't talk" Tuco
"when you have to shoot, shoot, don't talk" Tuco
Re: misfeed in the 22 pump
As has been mentioned, pump it like you are mad at it. I have one and have had no trouble even shooting shorts in it. Remember it is not made of balsa wood and as far as lubrication a drop inside the rifle is better than the whole can on the outside of it.
0 x