Spring has sprung. Get out and shoot your Henry
Converting .357 Mag to .357 Max
Converting .357 Mag to .357 Max
Has anyone converted their single shot .357 Mag to .357 Maximum? I am considering it and looking for some input from those that have. Thanks.
0 x
Re: Converting .357 Mag to .357 Max
It could be done but one you can forget about Henry fixing it if there is ever a problem and two trying to find brass etc. for a little increase in performance? I would think if they made one in 358 Win. it would be a better solution.
0 x
-
- Cattle Driver
- Posts: 884
- Joined: Sun Dec 11, 2016 10:48 pm
- Location: Spokane WA
Re: Converting .357 Mag to .357 Max
No personal experience. I assume that you found this site already?
https://357maximum.net/
I think it would be very cool in a single shot rifle, no way would I do a revolver.
https://www.americanrifleman.org/conten ... to-handle/
John Davies
Spokane WA
https://357maximum.net/
I think it would be very cool in a single shot rifle, no way would I do a revolver.
https://www.americanrifleman.org/conten ... to-handle/
John Davies
Spokane WA
0 x
- North Country Gal
- Firearms Advisor
- Posts: 6166
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Converting .357 Mag to .357 Max
I used to shoot the Max and load the Max in a Contender pistol and it was awesome. The Max gets you up into 44 mag power levels, but the Max is flatter shooting and not as nasty in recoil. And that's just in a pistol. It's even better in a carbine/rifle. Been awhile since I've shot the Max, so don't know the brass and component availability anymore, but if you can get set up to shoot the Max, you won't regret it.
The 357 Max guy is Mike Bellm for sure. He re-chambered a Contender 357 mag pistol barrel to the Max for me. He does it right, plus, awhile back I read that he also does Henry single shots.
Note that there are two Mike Bellms in business, father and son. The one you want is Dennis Michael Bellm, the father at https://357maximum.net He's located in Missouri. His son, Kurt Michael Bellm, runs an online retail store for Contender parts and so on in Colorado. Both go by Mike Bellm, though.
The 357 Max guy is Mike Bellm for sure. He re-chambered a Contender 357 mag pistol barrel to the Max for me. He does it right, plus, awhile back I read that he also does Henry single shots.
Note that there are two Mike Bellms in business, father and son. The one you want is Dennis Michael Bellm, the father at https://357maximum.net He's located in Missouri. His son, Kurt Michael Bellm, runs an online retail store for Contender parts and so on in Colorado. Both go by Mike Bellm, though.
1 x
Re: Converting .357 Mag to .357 Max
Are you doing it for a specific reason or just to have something different to play with? Im much the same as NCG. Ive played with it in a pistol but never a rifle. I had thoughts about doing my single shot to the max. But didnt do it. Why you might ask because for plinkin and fooling around the 357 works great for that and you can get some pretty good velocity out of 357 in the SS. I think if I wanted one bad enough Id buy another SS from Bellem already done. Brass can be found although its not real cheap.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
- BrokenolMarine
- Ranch Foreman
- Posts: 5824
- Joined: Sat Nov 26, 2016 8:28 am
- Location: South Central Oklahoma in the mountains
Re: Converting .357 Mag to .357 Max
357 Max ammo can be purchased. A friend online gave me a source and I bought two boxes. It's a kicker to shoot. But NOT cheap. I asked Miss Tina if she wanted to try and after taking this picture she ... passed.
Really, in the Super Blackhawk, the recoil isn't THAT bad...
Really, in the Super Blackhawk, the recoil isn't THAT bad...
2 x
You can tell a lot about the character of a man...
by the way he treats those who can do nothing for him.
by the way he treats those who can do nothing for him.
- North Country Gal
- Firearms Advisor
- Posts: 6166
- Joined: Thu Apr 07, 2016 12:46 pm
- Location: northern Wisconsin
Re: Converting .357 Mag to .357 Max
That is impressive. The Ruger Max is a one of a kind Super model. Ruger had to use a special longer frame to accommodate the length of the Max.
1 x
Re: Converting .357 Mag to .357 Max
If you decide to do it there’s a semi-local guy with some brass for sale. This guy is an FFL dealer in Pierce Idaho and is willing to ship the brass. This post is on our local guntrader site.
530 pieces of once fired 357 Remington maximum brass. $200 obo. Shipping available. Please call or text 208-827-2406. Thanks!
1 x