Spring has sprung. Get out and shoot your Henry
Henry Talley 1" scope mounts
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm
Henry Talley 1" scope mounts
Hi there..very new member here .
I'm just wondering what scopes folks mount on talleys 1" rings which screw right on top of reciever of H010.
Originally I wanted to put a scout scope but since no rail/mounts being available for scout scope, decided to go with regular 3-4" eye relief scope. I tried vortex 2-7×32
on low rings but the bell of scope hits the buckhorn site and the scope can't sit in the ring. I measured for medium height rings in same and they are only 10'th of a inch high which agsin seems to me is going to be problem. Trying to see what scopes these talley rings cam accomodate without removing rear buckhorm site amd using dovetail blank. Thank you once again for all your positive input!
I'm just wondering what scopes folks mount on talleys 1" rings which screw right on top of reciever of H010.
Originally I wanted to put a scout scope but since no rail/mounts being available for scout scope, decided to go with regular 3-4" eye relief scope. I tried vortex 2-7×32
on low rings but the bell of scope hits the buckhorn site and the scope can't sit in the ring. I measured for medium height rings in same and they are only 10'th of a inch high which agsin seems to me is going to be problem. Trying to see what scopes these talley rings cam accomodate without removing rear buckhorm site amd using dovetail blank. Thank you once again for all your positive input!
0 x
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm
Re: Henry Talley 1" scope mounts
Have you thought about a red dot.
0 x
Don't worry about getting older and still doing stupid stuff. You'll do the stupid stuff as always, only much slower. Hold my beer and watch this.......
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
H001T .22LR
H001T .22LR MONUMENT VALLEY
H003T PUMP .22LR
BBS .41 MAG
SS .357
SIDE GATE 38-55
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm
Re: Henry Talley 1" scope mounts
I thought of it but if red dot, rather than tubular stylw red dot, I would much rather prefer reflex sight style ...like the obes they have fir pistols....burris fast fire iii 3 moa??
0 x
- Rifletom
- Deputy Marshal
- Posts: 3910
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory
Re: Henry Talley 1" scope mounts
I put the Henry Talley integeral one piece mount/rings my BB steel and BB brass levers. On the steel, I put a Leupold 2-7x33mm shotgun scope on it and it fits perfectly. It clears the rear sight by about 1/32".
1 x
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm
- Rifletom
- Deputy Marshal
- Posts: 3910
- Joined: Tue Aug 21, 2018 11:26 pm
- Location: California Territory
Re: Henry Talley 1" scope mounts
I believe they only come in one configuration. All I know is they work well on my two Henry lever guns.
0 x
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm
Re: Henry Talley 1" scope mounts
Thabk you for suggestion. However I am looking for advice on specifically H010 steel model with the mounts in the link I posted
0 x
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm
Re: Henry Talley 1" scope mounts
https://www.bhphotovideo.com/c/product/ ... us_ii.html
Not from thus websute but found this no nqme brother of leopold Fx2.5...lol ...inrerested in trying it with these duscussed talley rungs on h010...provided it clears that buckhkrn site
Not from thus websute but found this no nqme brother of leopold Fx2.5...lol ...inrerested in trying it with these duscussed talley rungs on h010...provided it clears that buckhkrn site
0 x
-
- Tenderfoot
- Posts: 19
- Joined: Mon Aug 02, 2021 10:44 pm