Anyone running these - the one piece ring/base combo you order direct from Henry's website? Thinking about picking it up and running a Leupold FX-I 4x28 fixed power or the Leupold VX Freedom 2x7, both rimfire. I've used the 4x before and already have a 2x7 I could swap from my Ruger Rimfire. Probably need some more practice with the buckhorns before I throw in the towel but so far I'm not a big fan.
1) Curious about the height, the unit doesn't appear to have the lowest rings - both of those Leupold's are fairly compact, especially the 4x, and I'm wondering if they would position the scope too high.
2) Curious about eye relief and the scope position - looks like they are offset forward slightly and while I think there would be plenty of room to move the 2x7 back, I'm wondering if the 4x would sit too far forward given how small and compact it is.
Spring has sprung. Get out and shoot your Henry
Henry Big Boy Ring and Base Set (H006/H012 Series) Height
-
- Tenderfoot
- Posts: 26
- Joined: Sat Aug 27, 2022 4:17 pm
- markiver54
- Deputy Marshal
- Posts: 10325
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: Henry Big Boy Ring and Base Set (H006/H012 Series) Height
If you're referring to the Talley mount, that's what I chose for my Henry 357 BB Steel. On it, sits a small Weaver scope that clears the SBH sight.
0 x
I'm your Huckleberry
-
- Tenderfoot
- Posts: 26
- Joined: Sat Aug 27, 2022 4:17 pm
Re: Henry Big Boy Ring and Base Set (H006/H012 Series) Height
yessir - I assume it sits low enough for your preferences/purposes then? I'd much prefer the ring/base single unit vs mounting a pic rail and low rings separately, but I also am under the impression these can be a bit awkward to scope. I figured either Leupold, but especially the small 4x, would work well and sit low. I likewise have a BB Steel in 357.markiver54 wrote: ↑Mon Aug 29, 2022 1:07 pmIf you're referring to the Talley mount, that's what I chose for my Henry 357 BB Steel. On it, sits a small Weaver scope that clears the SBH sight.20181124_214040.jpg
0 x
- markiver54
- Deputy Marshal
- Posts: 10325
- Joined: Sun Nov 04, 2018 11:49 am
- Location: Biue Ridge Mountains, NC
Re: Henry Big Boy Ring and Base Set (H006/H012 Series) Height
Yes, it suits me just fine. I like the Talley mount because the lower rings and base are one piece. No need for lapping. As a matter of fact, lapping the Talley will void the warranty. Some shooters don't bother lapping their rings of any kind.
The Tally arrangement just makes sense to me. Less screws to work themselves loose.
BTW, I love this rifle!
The Tally arrangement just makes sense to me. Less screws to work themselves loose.
BTW, I love this rifle!
0 x
I'm your Huckleberry
Re: Henry Big Boy Ring and Base Set (H006/H012 Series) Height
I went with a different set up on my .41mag BBSC, but yes, you may have to get a butt cuff/cheek riser to get a decent cheek weld/sight picture. Butt cuff is from Diamond D.Not_Invented_Here wrote: ↑Mon Aug 29, 2022 12:52 pmAnyone running these - the one piece ring/base combo you order direct from Henry's website? Thinking about picking it up and running a Leupold FX-I 4x28 fixed power or the Leupold VX Freedom 2x7, both rimfire. I've used the 4x before and already have a 2x7 I could swap from my Ruger Rimfire. Probably need some more practice with the buckhorns before I throw in the towel but so far I'm not a big fan.
1) Curious about the height, the unit doesn't appear to have the lowest rings - both of those Leupold's are fairly compact, especially the 4x, and I'm wondering if they would position the scope too high.
2) Curious about eye relief and the scope position - looks like they are offset forward slightly and while I think there would be plenty of room to move the 2x7 back, I'm wondering if the 4x would sit too far forward given how small and compact it is.
https://www.diamonddcustomleather.com/p ... -butt-cuff
Scope is Nikon 3-9x, 40mm. Rings I bought locally, Base is the Henry H006/H012 Weaver base. I went this way instead of the one piece, so I could take the scope off easily without messing up eye relief/cant and having to re-zero. The set up is also a bit lower than the one piece set up imho. 1.78" between scope center line and bore center line.
0 x
Bellum Omnium Contra Omnes is rapidly becoming a reality (11/2023). Para Bellum.
Re: Henry Big Boy Ring and Base Set (H006/H012 Series) Height
Ordered that set up from Henry a few days ago, they say it will be here tomorrow...website says it will accommodate up to a 50mm scope, seems like a nice mount for the price
0 x
Keep your powder dry